DMS-30LCDA-4/20S 参数 Datasheet PDF下载

DMS-30LCDA-4/20 Series

Loop-Powered, 1.8V Drop, 4-20mA Process

Monitors with Full-Size LCD Displays

FEATURES

■

■

Super-low loop drop: 1.8V typical, 2.0V max.

Self-powered 2-wire operation; no separate

supply required

Unipolar, Bipolar, Positive, and Inverse Reading Models

Improved-performance replacement for

DMS-30LCD-4/20S

Subminiature package; Less than 0.90"

behind-the-panel depth

Large, 0.40"/10.2mm high, sunlight-viewable LCD display

Available in red, blue or green LED displays

Non-interacting gain (span) and offset (zero)

20-turn potentiometers

DIP-switch selectable range and decimal points

Hundreds of different input-current/readout combinations

Vibration-resistant package; reliable

screw-terminal input connections

■

■

Murata Power Solution’s new DMS-30LCDA-4/20 Series’ 1.8V nominal loop-drop is the

lowest of any comparably priced, 4-20mA input, 3�½-digit process monitors with full-size

LCD displays. This super-low loop-drop guarantees a maximum burden of no more than

100 Ohms! And because it’s loop-powered, all operating power is derived directly from the

loop current itself; no separate power source is required! Their floating 2-wire design allows

DMS-30LCDA-4/20 Series process monitors to be connected anywhere in the current loop.

All decimal point and range-change selections are made via an eight-position DIP switch

which features vibration-resistant, gold-plated contacts—there are no cumbersome jumpers

or solder gaps to contend with. Both gain (span) and offset (zero) adjustments are performed

using 20-turn, non-interacting potentiometers. Four different models accommodate unipolar,

bipolar, positive, and inverse display-reading applications. The DMS-30LCDA-4/20 Series’

DIP switch and adjustment potentiometers can accommodate literally hundreds of different

input-current/output-reading combinations.

DMS-30LCDA-4/20 Series’ subminiature package houses a large, 0.40”/10.2mm, high-

contrast LCD display that can be read in virtually all lighting conditions—including full sunlight!

The two connections to the external loop are made via a reliable screw-type terminal block. For

environmentally demanding applications, an optional panel-mount bezel assembly, featuring

screw fasteners and a rubber gasket, provides excellent resistance to dust and moisture. All

these outstanding features combine to make the new DMS-30LCDA-4/20 Series ideal for all

your 4-20mA process-monitoring instrumentation needs.

■

■

■

■

■

■

■

�½ �½ �½�½ �½�½ �½�½ �½�½ �½�½

�½ �½ �½ �½ �½ �½ �½ �½ �½

�½ �½ �½ �½

�½ �½

�½ �½

�½

�½

�½

�½

�½

�½ �½ �½

�½ �½ �½

�½ �½ �½

�½ �½ �½ �½

�½ �½ �½ �½ �½ �½

�½ �½ �½ �½ �½�½ �½ �½

�½ �½ �½ �½ �½ �½ �½ �½ �½

�½ �½�½ �½ �½ �½�½

�½ �½ �½�½

�½ �½ �½ �½ �½ �½

�½ �½

�½ �½�½ �½�½ �½ �½�½ �½ �½ �½ �½

�½

�½

�½

�½

�½

�½

�½

�½

�½ �½ �½

　

�½ �½ �½

�½ �½ �½�½ �½

�½ �½ �½ �½ �½ �½ �½ �½ �½

�½ �½ �½ �½ �½ �½ �½ �½�½ �½

�½ �½ �½ �½ �½ �½ �½

�½ �½ �½ �½ �½ �½ �½ �½ �½

�½

�½ �½ �½

�½

For full details go to

www.murata-ps.com/rohs

�½

�½

Figure 1. DMS-30LCDA-4/20 Simplified Schematic

�½ �½ �½ �½ �½�½�½ �½ �½ �½

www.murata-ps.com

Technical enquiries

email: sales@murata-ps.com, tel:

+1 508 339 3000

MPM_DMS30-LCDA.B02

Page 1 of 6