www.murata-ps.com
OKX
T/10 & T/16-D12 Series
Adjustable DOSA 10/16-Amp SIP DC/DC Converters
PRODUCT OVERVIEW
The OKX-T/10 and -T/16 series are miniature SIP
non-isolated Point-of-Load (POL) switch mode DC/DC
power converters for embedded applications. The
module is fully compatible with Distributed-power
Open Standards Alliance (DOSA) industry-standard
specifications (www.dosapower.com). Applications
include powering CPU’s, datacom/telecom systems,
distributed bus architectures (DBA), programmable
logic and mixed voltage systems.
The wide input range is 8.3 to 14 Volts DC. Two
maximum output currents are offered, 10 Amps
(T/10 models) or 16 Amps (T/16 models). Based
on fixed-frequency synchronous buck converter
switching topology, the high power conversion
efficient Point of Load (POL) module features
programmable output voltage and On/Off control.
An optional Sequence/Track input allows controlled
ramp-up and ramp-down outputs. The Sense input
provides load compensation. These converters also
include under voltage lock out (UVLO), output short
circuit protection, over-current and over tempera-
ture protections.
These units are designed to meet all standard
UL/EN/IEC 60950-1 safety and FCC EMI/RFI
emissions certifications and RoHS6 hazardous
substance compliance.
FEATURES
Non-isolated SIP POL DC/DC power module
8.3-14Vdc input voltage range
Programmable output voltage from 0.75-5.5Vdc
10 Amp (T/10) or 16 Amp (T/16) output current
models
Drives 1000 μF capacitive loads
High power conversion efficiency 94.5% at 3.3
Vout
Outstanding thermal derating performance
Over temperature and over current protection
On/Off control, Sense and optional Sequence/
Track input
UL/EN/IEC 60950-1 safety
Industry-standard (DOSA) SIP format
RoHS 6 hazardous substance compliance
Contents
Description, Connection Diagram, Photograph
Ordering Guide, Model Numbering
Detailed Electrical Specifications
Output Voltage Adjustment, Soldering Guidelines
Mechanical Specifications, Input/Output Pinout
Application Notes
OKX2-T/10-D12 Performance Data
OKX2-T/16-D12 Performance Data and Oscillograms
Page
1
2
3
4
5
6
9
11
Connection Diagram
+Vin
F1
+Vout
On/Off
Control
Sense
Controller
External
DC
Power
Source
Trim
Open = On
Closed = Off
Reference and
Error Amplifier
Common
Sequence/Track (optional)
Common
Figure 1. OKX2-T/10, -T/16
Note: Murata Power Solutions strongly recommends an external input fuse, F1.
See specifications.
For full details go to
www.murata-ps.com/rohs
www.murata-ps.com
Technical enquiries
email: sales@murata-ps.com, tel:
+1 508 339 3000
MDC_MDC_OKX2_T10T16.A03
Page 1 of 15
MURATA-PS [ MURATA POWER SOLUTIONS INC. ]
