UWE Series
Wide Input, Isolated
Eighth-Brick DC/DC Converters
MECHANICAL SPECIFICATIONS
(continued)—BASEPLATE
INSTALLED
4X THRU
M2X0.4 - 6H
.15" MAX SCREW
PENETRATION
2.30
(58.4)
TOP VIEW
0.90 (22.9)
0.625 (15.9)
ISOMETRIC
VIEW
0.40
(10.2)
.071±.002 STANDOFF
.040 PIN
AT EACH
1.500
(38.1)
0.14 (3.6)
ALUMINUM
BASEPLATE
0.19 (4.8) @
.062 PINS
SIDE VIEW
END VIEW
0.48 (12.3 ±0.5)
MOUNTING PLANE
.040±.002
AT PINS 1-3, 5-7
.062±.002
AT PINS 4 & 8
0.19 (4.8) @
.040 PINS
0.15 (3.8)
PIN 1
2.000
(50.8)
PIN 4
BOTTOM VIEW
0.300 0.45
(7.62) (11.43)
PIN 5
0.600
(15.24)
0.150 (3.81)
0.150 (3.81)
0.600
(15.24)
REF
PIN 2
PIN 3
MATERIAL:
.040 PINS: C26000 BRASS, 3/4 HARD
.062 PINS: C10200 COPPER ALLOY, FULL HARD
PIN 6
PIN 7
PIN 8
Dimensions are in inches (mm) shown for ref. only.
Third Angle Projection
FINISH: (ALL PINS)
GOLD (5 MICROINCHES MIN) OVER NICKEL (50 MICROINCHES MIN)
Tolerances (unless otherwise specified):
.XX ± 0.02 (0.5)
.XXX ± 0.010 (0.25)
Angles ± 2˚
Components are shown for reference only.
Murata Power Solutions, Inc.
11 Cabot Boulevard, Mansfield, MA 02048-1151 U.S.A.
ISO 9001 and 14001 REGISTERED
Murata Power Solutions, Inc. makes no representation that the use of its products in the circuits described herein, or the use of other
technical information contained herein, will not infringe upon existing or future patent rights. The descriptions contained herein do not imply
the granting of licenses to make, use, or sell equipment constructed in accordance therewith. Specifications are subject to change without
notice.
© 2009 Murata Power Solutions, Inc.
www.murata-ps.com/locations
22 Sep 2009
email: sales@murata-ps.com
MDC_UWE Series.A23_short
Page 4 of 4
MURATA-PS [ MURATA POWER SOLUTIONS INC. ]
