VDE
Pending
THE SLIM POWER RELAY
PE-RELAYS
Insulation complying to following standards:
EN 60255 General specification for electrical relays
EN 60335 For use in house-hold appliances
EN 60730 For use in temperature sensing appliances
EN 60950 For use in electrical business equipment
EN 60065 For use in entertainment electronics
(radio, HiFi-sets)
EN 50178 For use in industrial range
FEATURES
5
.197
28
1.102
15
.591
• Slim size
28 mm (L)
×
5 mm (W)
×
15 mm (H)
1.102 inch (L)
×
.197 inch (W)
×
.591 inch
(H)
permits high density mounting
• Wide switching capacity:
100 mA/12 V DC-6A/250 V AC
• High sensitivity: 170mW
• High breakdown (4,000 V) and surge
(6,000 V) voltage between contacts
and coil
• Clearance/creepage distance: 8/8 mm
• 1 Form A/1 Form C contact.
SPECIFICATIONS
Contacts
Arrangement
Contact material
Initial contact resistance, max.
(By voltage drop 6 V DC 1 A)
Nominal switching capacity
Rating (resis- Maximum switching power
tive)
Maximum switching voltage
Max. switching current
Expected life Mechanical (at 180 cpm)
(min.opera-
Electrical (at 6 cpm)
tions)
(at rated load)
1 Form A, 1 Form C
Au-plated
Silver alloy
silver alloy
100 m
Ω
30 m
Ω
Characteristics
Initial insulation resistance*
1
Initial breakdown
voltage*
2
Between open
contacts
Min. 1,000 M
Ω
at 500 V DC
1,000 Vrms
4,000 Vrms
Min. 6,000 V (Initial)
Max. 8 ms (approx. 5 ms)
Max. 4 ms (approx. 2.5 ms)
Max. 30
°
C with nominal coil
voltage across
coil and at nominal switching
capacity
Functional*
5
Destructive*
6
Functional*
7
Vibration resistance
Destructive
Conditions for operation,
Ambient
transport and storage*
8
temp.
(Not freezing and condens-
Humidity
ing at low temperature)
6 A 250 V AC
1,500 VA
400 V AC/300 V DC
6 A (AC)
5
×
10
6
N.O.: 5
×
10
4
N.C.: 3
×
10
4
170 mW (4.5 to 24 V DC)
217 mW (48 V DC)
Between con-
tacts and coil
Surge voltage between contacts and
coil*
3
Operate time*
4
(at nominal voltage)
Release time (without diode)*
4
(at nominal voltage)
Temperature rise
Coil (at 25
°
C
77
°
F,
50% R.H.)
Nominal operating power
Remarks
* Specifications will vary with foreign standards certification ratings.
*
1
Measurement at same location as "Intial breakdown voltage" section
*
2
Detection current: 10mA
*
3
Wave is standard shock voltage of
±
1.2
×
50
µ
s according to JEC-212-1981
*
4
Excluding contact bounce time
*
5
Half-wave pulse of sine wave: 50ms; detection time: 10
µ
s
*
6
Half-wave pulse of sine wave: 11ms
*
7
Detection time: 10
µ
s
*
8
Refer to 5. Conditions for operation, transport and storage mentioned in
AMBIENT ENVIRONMENT (Page 61).
Shock resistance
1 Form C: Min. 49 m/s
2
{5 G}
1 Form A: Min. 98 m/s
2
{10 G}
Min. 980 m/s
2
{100 G}
10 to 55 Hz
at double amplitude of 1.0 mm/6 G
10 to 55 Hz
at double amplitude of 1.5 mm/9 G
–40
°
C to +85
°
C
–40
°
F to +185
°
F
5 to 85%R.H.
Approx. 4 g
.14 oz
Unit weight
TYPICAL APPLICATIONS
• Interface relays for programmable con-
trollers
• Output relays for measuring equipment,
timers, counters and temperature con-
trollers
• Industrial equipment, office equipment
• House-hold appliances for Europe
ORDERING INFORMATION
Ex. APE
0
Contact arrangement
1: 1 Form A
3: 1 Form C
Contact type
0: Single contact
Contact material
0: Silver alloy
1: Au-plated silver alloy
Coil voltage (DC)
4H: 4.5 V 18: 18 V
06: 6 V
24: 24 V
12: 12 V 48: 48 V
(Notes) 1. Standard packing: Tube: 20 pcs.; Case: 1,000 pcs.
2. 5 V, 60 V type is also available.
3. 1 Form B is also available.
211
NAIS [ NAIS(MATSUSHITA ELECTRIC WORKS) ]
