Compact & Slim 2 Form C
Non-polarized Relay
HX-RELAYS
• High-density mounting is possible
• High reliability
The use of a gold-clad bifurcated struc-
ture for the movable contacts, and a low
gas material for the forming materials and
coil wiring ensures high contact reliability.
FEATURES
15.0
.591
7.4
.291
9.4
.370
• Compact size of (W) 7.4
×
(L) 15.0
×
(H)
9.4 mm
(W) .291
×
(L) .591
×
(H) .370
inch.
• Surge withstand voltage of 1,500 V
(between contact and coil)
Conforms to FCC Part 68.
mm
inch
SPECIFICATIONS
Contact
Arrangement
Initial contact resistance
(By voltage drop 6 V DC 1 A)
Contact material
Nominal switching
capacity (resistive load)
Max. switching power
(resistive load)
Max. switching voltage
Max. switching current
Min. switching capability
f
1
Nominal operating power
Mechanical (at 180 cpm)
Expected
life (min.
operations) Electrical (at 20 cpm)
Note:
f
1This value can change due to the switching frequency, environmental conditions,
and desired reliability level, therefore it is recommended to check this with the ac-
tual load.
Characteristics
2 Form C
Max. 100 m
Ω
Gold-clad silver alloy
1 A 30 V DC, 0.3 A 125 V AC
30 W (DC), 37.5 VA (AC)
110 V DC, 125 V AC
1A
1 mA 1 V DC
320 mW
10
7
10
(1 A 30 V DC,
0.3 A 125 V AC resistive)
5
Initial insulation*
1
resistance
Between contacts
Initial
breakdown
voltage
Between contact and
coil
Min. 1,000 M
Ω
(at 500 V DC)
750 V rms for 1 min.
1,000 V rms for 1 min.
1,000 V rms for 1 min.
Max. 60
°
C
Max. 6 ms (Approx. 4 ms)
Max. 5 ms (Approx. 3 ms)
Min. 100 m/s
2
{10G}
Min. 1,000 m/s
2
{100G}
10 to 55 Hz
at double amplitude of 1.0 mm
10 to 55 Hz
at double amplitude of 1.5 mm
–40 to +70
°
C
–40 to +158
°
F
5 to 85% R.H.
86 to 106 kPa
Approx. 2g
.07 oz
Rating
Between contacts sets
Temperature rise*
2
Operate time*
3
(at 20
°
C
68
°
F)
Release time(without diode)*
3
(at 20
°
C
68
°
F)
Functional*
4
Shock resistance
Destructive*
5
Functional*
6
Vibration resistance
Destructive
Ambient
temperature
Humidity
Atmospheric
pressure
Remarks
* Specifications will vary with foreign standards certification ratings.
*
1
Measurement at same location as "Initial breakdown voltage" section.
*
2
By resistive method, nominal voltage applied to the coil; contact carrying current:
1A.
*
3
Nominal voltage applied to the coil, excluding contact bounce time.
*
4
Half- wave pulse of sine wave: 11ms, detection time: 10
µ
s
*
5
Half- wave pulse of sine wave: 6ms
*
6
Detection time: 10
µ
s
*
7
Refer to 5. Conditions for operation, transport and storage mentioned in
AMBIENT ENVIRONMENT (Page 61)
Conditions for
opetation, transport
and storage*
7
Unit weight
TYPICAL
APPLICATIONS
• Telephone exchange, transmission
equipment
• Communications devices
• Measurement devices
• Home appliances, and audio/visual
equipment
• Office equipment
ORDERING INFORMATION
Ex. HX
2
3V
Contact arrangement
2: 2 Form C
Note: 2,500V Surge (Bellcore) type is also available.
Please consult us for details.
Coil voltage(DC)
1.5, 3, 4.5, 5, 6, 9, 12, 24 V
183
NAIS [ NAIS(MATSUSHITA ELECTRIC WORKS) ]
