LOW PROFILE HIGH
FREQUENCY RELAY
RP-RELAYS
10.6
.417
9
.748
4
.157
• High frequency relay with the low profile of 4 mm
.157 inch
• Excellent high frequency characteristics
Isolation: Min. 10dB (at 1.8 GHz)
Insertion loss: Max. 1.0dB (at 1.8 GHz)
V.S.W.R.: Max. 1.3 (at 1.8 GHz)
• High sensitivity in small size
Size: 10.6
×
9
×
4 mm
.417
×
.354
×
.157 inch
Nominal operating power: 140 mW
mm
inch
SPECIFICATIONS
Contact
Arrangement
Contact material
Movable
1 Form C
Silver alloy
Gold-clad silver
50 mΩ
0.1 A 30 V DC
Contact switching power: 1 W
(Max. 1.8 GHz); Contact carrying
power: 3 W (Max. 1.2 GHz)
1 W (Max. 1.8 GHz)
Min. 15 dB (at 1 GHz)
Min. 10 dB (at 1.8 GHz)
Max. 0.5 dB (at 1 GHz)
Max. 1 dB (at 1.8 GHz)
Max. 1.2 (at 1 GHz)
Max. 1.3 (at 1.8 GHz)
5×10
6
10
5
(0.1 A 30 V DC)
10
5
(1 W at 1.8 GHz;
V.S.W.R.: max. 1.3)
Characteristics
Max. operating speed (at rated load)
Initial insulation resistance*
1
20 cpm
Min. 1,000 MΩ at 500 V DC
750 Vrms for 1 min.
1,500 Vrms for 1 min.
Max. 3 ms
(Approx. 1.5 ms)
Max. 2 ms
(Approx. 1 ms)
Max. 50°Cwith nominal coil
voltage across coil and at
nominal switching capacity
Stationary
Initial contact resistance, max.
(By voltage drop 6 V DC 0.1 A)
Nominal switch-
ing capacity
Initial breakdown Between open contacts
voltage*
2
Between contacts and coil
Operate time*
3
(at nominal voltage)
Release time(without diode)*
3
(at nominal voltage)
Temperature rise
Functional*
4
Destructive*
5
Functional*
6
Destructive
Conditions for operation,
transport and storage
Ambient temp.
Rating
Isolation
High frequency
characteristics
(Impedance 50Ω)
Insertion loss
V.S.W.R.
Mechanical
(at 180 cpm)
Electrical
(at 20 cpm)
Shock resistance
Min. 500 m/s
2
{50 G}
Min. 1,000 m/s
2
{100 G}
10 to 55 Hz
at double amplitude of 3 mm
10 to 55 Hz
at double amplitude of 5 mm
–40°C to 70°C
–40°F to 158°F
5 to 85% R.H.
Approx. 1 g
.04 oz
Vibration
resistance
Expected life
(min. opera-
tions)
Coil (at 25°C,
68°F)
Voltage type
1.5 to 12 V DC
24 V DC
Nominal operating power
140 mW
270 mW
(Not freezing and condensing
Humidity
at low temperature)
Unit weight
Remarks
* Specifications will vary with foreign standards certification ratings.
*
1
Measurement at same location as “Initial breakdown voltage” section
*
2
Detection current: 10mA
*
3
Excluding contact bounce time
*
4
Half-wave pulse of sine wave: 11ms, detection time: 10µs
*
5
Half-wave pulse of sine wave: 6ms
*
6
Detection time: 10µs
TYPICAL APPLICATIONS
• Antenna switching of mobile phone
• Switching signal of measuring equipment
ORDERING INFORMATION
Ex. RP
1
H
3V
Contact arrangement
1:1 Form C
Terminal shape
Nil: Standard PC board terminal
H: Self-clinching terminal
Coil voltage (DC)
1.5, 3, 4.5, 5, 6, 9, 12, 24 V
Note: Standard packing; Carton: 50 pcs. Case 1,000 pcs.
93
NAIS [ NAIS(MATSUSHITA ELECTRIC WORKS) ]
