DATA SHEET
MOS INTEGRATED CIRCUIT
µ
PD16315
1/4- to 1/12-DUTY FIP
TM
(VFD) CONTROLLER/DRIVER
DESCRIPTION
The
µ
PD16315 is a FIP (Fluorescent Indicator Panel, or Vacuum Fluorescent Display) controller/driver that is driven on a
1/4- to 1/12- duty factor. It consists of 16 segment output lines, 4 grid output lines, 8 segment/grid output drive lines, a
display memory, a control circuit, and a key scan circuit. Serial data is input to the
µ
PD16315 through a three-line serial
interface. This FIP controller/driver is ideal as a peripheral device for a single-chip microcomputer.
FEATURES
•
Multiple display modes: 16-segment & 12-digit to 24-segment & 4-digit
•
Key scanning: 16 x 2 matrix
•
Dimming circuit: 8 steps
•
High-withstanding-voltage output: V
DD
−
35 V MAX.
•
LED ports: 4 chs., 20 mA MAX.
•
No external resistors necessary for driver outputs: P-ch open-drain + pull-down resistor output
•
Serial interface: CLK, STB, D
IN
, D
OUT
ORDERING INFORMATION
Part Number
Package
44-pin Plastic QFP (10 x 10)
µ
PD16315GB-3BS
The information in this document is subject to change without notice. Before using this document, please
confirm that this is the latest version.
Not all products and/or types are available in every country. Please check with an NEC Electronics
sales representative for availability and additional information.
Document No. S14074EJ1V0DS00 (1st edition)
Date Published February 2003 NS CP(K)
Printed in Japan
1999