DATA SHEET
MOS INTEGRATED CIRCUIT
µ
PD720114
ECOUSB
TM
Series
USB 2.0 HUB CONTROLLER
The
µ
PD720114 is a USB 2.0 hub device that complies with the Universal Serial Bus (USB) Specification Revision
2.0 and works up to 480 Mbps. USB 2.0 compliant transceivers are integrated for upstream and all downstream ports.
The
µ
PD720114 works backward compatible either when any one of the downstream ports is connected to a USB 1.1
compliant device, or when the upstream port is connected to a USB 1.1 compliant host.
Detailed function descriptions are provided in the following user’s manual. Be sure to read the manual before designing.
µ
PD720114 User’s Manual: S17463E
FEATURES
•
Compliant with Universal Serial Bus Specification Revision 2.0 (Data Rate 1.5/12/480 Mbps)
•
High-speed or full-speed packet protocol sequencer for Endpoint 0/1
•
4 (Max.) downstream facing ports
•
All downstream facing ports can handle high-speed (480 Mbps), full-speed (12 Mbps), and low-speed (1.5
Mbps) transaction.
•
Supports split transaction to handle full-speed and low-speed transaction on downstream facing ports when
Hub controller is working in high-speed mode.
•
One Transaction Translator per Hub and supports four non-periodic buffers
•
Supports self-powered and bus-powered mode
•
Supports individual or global over-current detection and individual or ganged power control
•
Supports downstream port status with LED
•
Supports non-removable devices by I/O pin configuration
•
Support Energy Star for PC peripheral system
•
On chip Rpu, Rpd resistors and regulator (for core logic)
•
Low power consumption
•
Use 30 MHz X’tal
•
3.3 V power supply
The information in this document is subject to change without notice. Before using this document, please
confirm that this is the latest version.
Not all products and/or types are available in every country. Please check with an NEC Electronics
sales representative for availability and additional information.
Document No. S17462EJ2V0DS00 (2nd edition)
Date Published May 2005 NS CP (K)
Printed in Japan
2005