DATA SHEET
MOS INTEGRATED CIRCUIT
µ
PD75P108B
4-BIT SINGLE-CHIP MICROCOMPUTER
DESCRIPTION
The
µ
PD75P108B is a version of the
µ
PD75108 in which the on-chip mask ROM is replaced by one-time
PROM which can be written to once only, or EPROM which is capable of program write, erasure and rewrite.
Also, since the
µ
PD75P108B is capable of program write by a user, it can easily be exchanged with the mask
version, allowing evaluation at low voltage.
Detailed functional descriptions are shown in the following User’s Manual. Be sure to read for designations.
µ
PD751×× Series User’s Manual : IEM-922
FEATURES
•
Version with on-chip PROM, allowing low-voltage operation V
DD
= 2.7 to 6.0 V
•
µ
PD75108 compatible
•
Memory capacity
•
Program memory (PROM) : 8064
×
8 bits
•
Data memory (RAM)
: 512
×
4 bits
•
Correspondence to QTOP™ microcomputer
ORDERING INFORMATION
Ordering Code
Package
64-pin plastic shrink DIP (750 mil)
64-pin ceramic shrink DIP (with window)
64-pin plastic QFP (14
×
20 mm, 1.0 mm pitch)
On-Chip ROM
One-time PROM
EPROM
One-time PROM
µ
PD75P108BCW
µ
PD75P108BDW
µ
PD75P108BGF-3BE
Note
5
There is no on-chip pull-up resistor function by means of a mask option.
QUALITY GRADE
Standard
Please refer to “Quality grade on NEC Semiconductor Devices” (Document number IEI-1209) published by
NEC Corporation to know the specification of quality grade on the devices and its recommended applications.
In this ducument, common parts of one-time PROM products and EPROM products are represented as
PROM.
The information in this document is subject to change without notice.
The mark
5
shows major revised points.
Document No. IC-2580C
(O. D. No.
IC-7987C)
Date Published December 1993 P
Printed in Japan
© NEC Corporation 1989