Agilent HFCT-5964TL/TG/NL/NG/ATL/
ATG Single Mode Laser Small Form
Factor Transceivers for ATM, SONET OC-3
/SDH STM-1
Part of the Agilent METRAK family
Data Sheet
Features
• HFCT-5964TL/ATL:
Links of 15 km with 9/125 µm
single mode fiber (S1.1)
• HFCT-5964NL:
Links of 40 km with 9/125 µm
single mode fiber (L1.1)
• Multisourced 2 x 10 package style
with LC receptacle
• Single +3.3 V power supply
• Temperature range:
HFCT-5964TL:
0°C to +70 °C,
HFCT-5964ATL: -40 °C to +85 °C,
HFCT-5964NL: -5 °C to +70 °C,
• Wave solder and aqueous wash
process compatible
• Manufactured in an ISO9002
certified facility
• Fully Class 1 CDRH/IEC 825
compliant
• +3.3 V TTL signal detect output
• Transceivers are available with
and without EMI nose shield
(see ordering information details)
Applications
• SONET/SDH equipment
interconnect, OC-3/SDH STM-1
rate
• Long and intermediate reach
ATM/SONET links
• Suitable for Fast Ethernet
Applications
Description
The HFCT-5964TL/TG/NL/NG/
ATL/ATG are high performance,
cost effective modules for serial
optical data communications
applications specified for a
signal rate of
155 Mb/s. They are designed to
provide SONET/SDH compliant
intermediate and long reach
links at 155 Mb/s.
All modules are designed for
single mode fiber and operate at
a nominal wavelength of 1300
nm. They incorporate high
performance, reliable, long
wavelength optical devices and
proven circuit technology to give
long life and consistent service.
The transmitter section of the
HFCT-5964TL/TG/NL/NG/ATL/
ATG incorporates a 1300 nm
Fabry Perot (FP) laser.
The transmitter has full IEC 825
and CDRH Class 1 eye safety.
The receiver section uses an
MOVPE grown planar PIN
photodetector for low dark
current and excellent
responsivity.
These transceivers are supplied
in the new industry standard 2 x
10 DIP style package with the LC
fiber connector interface and is
footprint compatible with SFF
Multi Source Agreement (MSA).
NEL [ NEL FREQUENCY CONTROLS,INC ]
