CompactRIO Integrated Systems with Real-Time Controller
and Reconfigurable Chassis
NI cRIO-907x
NEW!
• Integrated CompactRIO systems with
a reconfigurable FPGA chassis and
embedded real-time controller
• Lower cost systems for high-volume
OEM applications
• Up to 2M gate reconfigurable FPGA
• 8 slots for C Series I/O modules
• Up to 400 MHz real-time processor
• Up to 128 MB DRAM memory, 256 MB
of nonvolatile storage
• Up to two 10/100BaseTX Ethernet ports
with built-in FTP/HTTP servers and
LabVIEW remote panel Web server
• RS232 serial port for peripheral devices
• Low power consumption with single
19 to 30 VDC power supply inputs
• -20 to 55 °C operating
temperature range
LabVIEW Development Software
• LabVIEW Real-Time (VxWorks)
• LabVIEW FPGA
Driver Software
• NI-RIO for reconfigurable
embedded systems
>> For complete specifications, see the
CompactRIO cRIO-9072/9074
Operating Instructions
manual at
ni.com/manuals
.
Product
cRIO-9072
cRIO-9074
Processor Speed
(MHz)
266
400
FPGA Size
(Gates)
1M
2M
Module
Slots
8
8
DRAM Memory
(MB)
64
128
Internal Nonvolatile
Storage (MB)
128
256
10/100BaseTX
Ethernet Port
(Dual)
RS232
Serial Port
Power Supply
Input Range
19 to 30 VDC
19 to 30 VDC
Remote Panel
Web and FTP Servers
Table 1. cRIO-907x Selection Guide
Overview and Applications
National Instruments cRIO-907x integrated systems combine an
industrial real-time controller and reconfigurable FPGA chassis for
high-volume and industrial machine control and monitoring applications.
The new NI cRIO-9072 integrated system features an industrial
266 MHz real-time processor and an 8-slot chassis with an embedded,
reconfigurable 1M gate FPGA chip. The new NI cRIO-9074 integrated
system contains a 400 MHz real-time processor and an 8-slot chassis
with an embedded, reconfigurable 2M gate FPGA chip. Both systems
feature built-in nonvolatile memory and a fault-tolerant file system that
deliver increased reliability for data-logging applications.
Both systems also accept up to eight NI C Series I/O modules.
A variety of I/O modules are available including voltage, current,
thermocouple, RTD, accelerometer, and strain gage inputs; up to ±60 V
simultaneous sampling analog I/O; 12, 24, and 48 V industrial digital I/O;
5 V/TTL digital I/O; counter/timers; pulse generation; and high
voltage/current relays.
The 10/100 Mb/s Ethernet port allows for programmatic
communication over the network and built-in Web (HTTP) and file (FTP)
servers. The cRIO-9074 features dual Ethernet ports, which allows for
the use of one port for network communication to a host PC or enterprise
system and the other port for expansion I/O (easily connect another
CompactRIO system or another Ethernet-based device for additional I/O).
Embedded Software
You can quickly program the reconfigurable FPGA within the cRIO-907x
systems using the NI LabVIEW FPGA Module for custom and high-speed
control, I/O timing, and signal processing. The LabVIEW Real-Time
Module includes built-in function blocks for floating-point control,
processing, analysis, data logging, and communication for programming the
embedded real-time processor. LabVIEW Real-Time also has function blocks
to program data transfer between the real-time processor and the FPGA.
Ordering Information
NI cRIO-9072 ........................................................................779998-01
NI cRIO-9074 ........................................................................779999-01
OEM Pricing Available!
Aggressive discounts are available for high-volume customers.
BUY NOW!
For complete product specifications, pricing, and accessory
information, call 800 813 3693 (U.S.) or go to
ni.com/compactrio.
NI [ NATIONAL INSTRUMENTS CORPORATION ]
