Analog Output Modules for Compact FieldPoint
Physical Characteristics
LED indicators
POWER (green) ............................... Power on and self-test passed
READY (green) ................................ Module configured and ready
Fault status (red)............................. Open circuit (cFP-AO-200) or current
limit (cFP-AO-210) on channel
Dimensions.......................................... 127.0 by 65.9 by 23.9 cm
(5.00 by 2060 by 0.94 in.)
Weight
cFP-AO-200 ..................................... 113 g (4.0 oz)
cFP-AO-210 ..................................... 115 g (4.1 oz)
Specifications
Typical for -40 to 70 °C unless otherwise noted.
Output Characteristics
Number of channels............................ 8 single-ended
DAC resolution.................................... 12 bits, 1 in 4,096
Current Output (cFP-AO-200)
Output range ....................................... 0 to 20 or 4 to 20 mA,
programmable (0 to 21 or 3.5 to
21 mA with overranging)
Output type ......................................... Current source
(external loop power required)
External loop power............................ 5 to 24 VDC
Internal voltage drop........................... 3 V
Resistive load .......................................... Up to 1 kΩ with 24 VDC supply,
up to 100
Ω
with 5 V supply
Protection and error detection............ Short-circuit and open-circuit
Default power-up state....................... 0 mA
Resolution ........................................... 6 µA
Power Requirement
Power from network module
cFP-AO-200 ..................................... 350 mW
Environment
Operating temperature ....................... -40 to 70 °C
Storage temperature........................... -55 to 85 °C
Relative humidity ................................ 10 to 90%, noncondensing
Voltage Output (cFP-AO-210)
Output range ....................................... 0 to 10 V (0 to 10.2 V with
overranging)
Output type ......................................... Voltage source
(external power optional)
External power supply ........................ 15 to 30 VDC
Internal voltage drop........................... 3 V
Current drive ....................................... 1 mA sourcing or sinking,
10 mA sourcing with external
power supply
Overvoltage protection ....................... -10 to 20 V
Default power-up state....................... 0 V
Resolution ........................................... 2.5 mA
Shock and Vibration
Operating vibration, random
(IEC 60068-2-64) ............................. 10 to 500 Hz, 5 grms
Operating vibration, sinusoidal
(IEC 60068-2-6) ............................... 10 to 500 Hz, 5 g
Operating shock
(IEC 60068-2-27) ............................. 50 g, 3 ms half sine,
18 shocks at 6 orientations;
30 g, 11 ms half sine,
18 shocks at 6 orientations
Isolation Voltage
Maximum isolation voltage ................ 250 V
rms
, Installation Category II
Channel-to-channel isolation.............. No isolation between channels
Transient overvoltage.......................... 2,300 V
rms
Accuracy
Absolute accuracy (cFP-AO-200).........
Gain error (cFP-AO-210) ......................
Offset error (cFP-AO-210)....................
Monotonicity .......................................
Offset temperature coefficient
cFP-AO-200 .....................................
cFP-AO-210 .....................................
Gain temperature coefficient
cFP-AO-200 .....................................
cFP-AO-210 .....................................
0.1% typ, 0.3% max
0.2% typ, 0.4% max
4 mV typ, 14 mV max
Guaranteed over temperature range
50 nA/°C
70 µV/°C
40 ppm/°C
20 ppm/°C
Dynamic Characteristics
Maximum update rate ........................ 200 updates/s
Slew rate
cFP-AO-200 ..................................... 0.4 mA/µs
cFP-AO-210 ..................................... 0.5 V/µs
BUY ONLINE
at
ni.com
or
CALL 800 813 3693 (U.S.)
3
NI [ NATIONAL INSTRUMENTS CORPORATION ]
