High-Speed Voltage Output – up to 1 MS/s/Channel, up to 16 Bits, up to 32 Channels
trigger, and counter/timer signals through screw terminals. Does not
work with NI 6703 or NI 6704 devices.
stability. Use this cable for a DAQCard located in the bottom PCMCIA
slot of a laptop.
TB-2705 ................................................................................778241-01
Dimensions – 8.43 by 10.41 by 2.03 cm (3.32 by 4.1 by 0.8 in.)
0.5 m . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .186838-0R5
1 m . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .186838-01
SHC68U-68-EP – Identical to the SHC68-68-EP, except that the
DAQCard connector is inverted so you can use two latching DAQCard
devices in adjacent slots. Use this cable with a DAQCard inserted in the
upper PCMCIA slot of a laptop.
Synchronization Cables
RTSI Bus Cables – Used to connect timing and synchronization signals
among measurement, vision, motion, and CAN boards for PCI. For
systems with long and short boards, use the extended RTSI cable.
2 boards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .776249-02
3 boards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ..776249-03
4 boards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .776249-04
5 boards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .776249-05
Extended, 5 boards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .777562-05
0.5 m . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .187406-0R5
1 m . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .187406-01
SH68-C68-S – Shielded cable for connecting and latching NI 672x
devices to standard 68-pin accessories.
2 m . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .186381-02
Shielded I/O Cables
Ribbon I/O Cables
SH68-68-EP – Shielded 68-conductor cable terminated with two 68-pin
female 0.050 series D-type connectors, featuring individually shielded
analog twisted pairs for reduced crosstalk with high-speed devices. This
cable works with all NI 671x and NI 673x devices.
R6868 – 68-conductor flat ribbon cable terminated with two 68-pin
connectors. Use this cable to connect the NI 670x, NI 671x, and NI 673x
devices to low-cost 68-pin accessories.
1 m . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .182482-01
1 m . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .184749-01
RC68-68 – 68-conductor flat ribbon cable terminated with one
VHDCI 68-pin connector and one 68-pin SCSI II connector. Use this
cable to connect the NI 6722 devices and DAQCard-6715 with standard
68-pin accessories.
SHC68-68-EP – Shielded cable for connecting and latching the NI
DAQCard-6715, NI 6722, and NI 6723 to standard 68-pin accessories.
Latching screws secure the shielded connector to the device itself for
1 m . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .187252-01
BNC-2110
SCB-68
CA-1000
CB-68LP I/O and CB-68LPR
TB-2705
RTSI Bus Cable
SH68-68-EP
SHC68-68-EP
R6868 Ribbon Cable
RC68-68 Ribbon Cable
Shielded Cable
BUY ONLINE at ni.com or CALL (800) 813 3693 (U.S.)
7
NI [ National Instruments ]
