High-Value Embedded Controllers for PXI
Specifications
Specifications subject to change without notice.
Environment
Maximum altitude .................................
Pollution degree ....................................
Intel Celeron 575 2.0 GHz
Intel Celeron T3100 Dual Core 1.9 GHz
Mobile Intel GM45 Express Chipset
667 MHz
800 MHz
1 GB 800 MHz DDR2 RAM PC2 6400
4 GB 800 MHz DDR2 RAM PC2 6400
10/100/1000BASE-TX, RJ45 connector
80 GB minimum, 5400 rpm, internal
2.5 in., 9.5 mm Serial ATA 1.0 interface
Integrated Graphics (Mobile Intel
GM45 Express Chipset)
1 (RS232)
IEEE 1284 Type C miniature connector
(adapter cable not included)
Relative humidity range ........................
2
Relative humidity range ........................
Indoor use only.
2,000 m (800 mbar)
(at 25 °C ambient temperature)
2
Features
Processor
PXI-8101............................................
PXI-8102............................................
Chipset ..................................................
Front-side bus
PXI-8101............................................
PXI-8102............................................
System memory (RAM)
Standard ...........................................
Maximum ..........................................
Ethernet .................................................
Hard drive ..............................................
Video .....................................................
Serial .....................................................
Parallel ..................................................
Hi-Speed USB........................................
Operating Environment
Ambient temperature range
1
................
5 to 50 °C
2, 3
(tested in accordance with
IEC-60068-2-1 and IEC-60068-2-2)
10 to 90% noncondensing
(tested in accordance with
IEC-60068-2-56)
For chassis that are not available in the online catalog at
ni.com,
contact
National Instruments for supported operating temperatures.
2
5 to 40 °C for the NI PXI-1000B DC.
3
Processor should not throttle CPU frequency under reasonable, worst case
processor workloads in high operating temperature.
1
Storage Environment
Ambient temperature range..................
-40 to 65 °C
(tested in accordance with
IEC-60068-2-1 and IEC-60068-2-2)
5 to 95% noncondensing
(tested in accordance
with IEC-60068-2-56)
Power Requirements
Current (A)
Voltage
(V)
+3.3
+5
+12
-12
Typical
PXI-8101
2.25
3.50
0.001
0.0
PXI-8102
2.50
4.00
0.001
0 .0
PXI-8101
3.6
6.6
0.075
0.0
Maximum
PXI-8102
4.80
7.80
0.075
0.0
Shock and Vibration
Operating shock ....................................
30 g peak, half-sine, 11 ms pulse
(tested in accordance with
IEC-60068-2-27; test profile developed
in accordance with MIL-PRF-28800F)
Random vibration
Operating ..........................................
Nonoperating ....................................
5 to 500 Hz, 0.3 g
rms
(with solid-state hard drive)
5 to 500 Hz, 2.4 g
rms
(tested in accordance with
IEC-60068-2-64; nonoperating test
profile exceeds the requirements of
MIL-PRF-28800F, Class 3)
Physical
Board dimensions..................................
2-slot 3U PXI module,
4.0 by 13 by 21.6 cm
(1.59 by 5.1 by 8.5 in.)
Slot requirements..................................
Compatibility .........................................
Weight...................................................
One system slot plus one controller
expansion slot
Fully compatible with PXI Specification
0.645 kg (1.42 lb) typical
BUY ONLINE at ni.com or C
ALL 800 813 36
93 (U.S.)
4
NI [ NATIONAL INSTRUMENTS CORPORATION ]
