NI PXI/PCI-5142 Specifications
14-Bit 100 MS/s Digitizer with Onboard Signal Processing
This document lists the specifications for the NI PXI/PCI-5142 (NI 5142)
high-speed digitizer. Unless otherwise noted, the following conditions were
used for each specification:
•
•
•
All filter settings
All impedance selections
Sample clock set to 100 MS/s
Typical values are used to define an average unit measured at ambient
temperatures of 15 °C to 35 °C. Specifications are subject to change
without notice. For the most recent NI 5142 specifications, visit
ni.com/
manuals
.
To access NI 5142 documentation, navigate to
Start»All Programs»
National Instruments»NI-SCOPE»Documentation.
Hot Surface
If the NI 5142 has been in use, the device or the shield may exceed safe
handling temperatures and may cause burns. Allow the NI 5142 to cool before touching the
shield or removing the device from the chassis or PC. Refer to the
Environment
section for
operating temperatures.
Contents
Vertical.................................................................................................... 2
Analog Input (Channel 0 and Channel 1) ........................................ 2
Horizontal................................................................................................ 13
Sample Clock ................................................................................... 13
Phase-Locked Loop (PLL) Reference Clock................................... 16
CLK IN (Sample Clock and Reference Clock Input,
Front Panel Connector) ................................................................. 16