High-Density General-Purpose SPST Relays
Specifications
Specifications subject to change without notice. Visit
ni.com/manuals
for
the latest full specifications.
Physical
Relay types ............................................
Contact material ...................................
I/O connectors .......................................
Dimensions............................................
300 V, CAT I
300 V
1A
(switching or carry, per channel)
Electromechanical, latching
Palladium-ruthenium, gold covered
200 POS LFH Matrix 50, receptacle
10 by 17.5 cm (3.9 by 6.9 in.), 1 3U slot
Input Characteristics
Maximum switching voltage
Channel-to-ground ............................
Channel-to-channel ..........................
Maximum current .............................
Simultaneous channels at
maximum current (±35 °C) ................
Maximum switching power ..................
Typical DC path resistance
Initial .................................................
End of life..........................................
Thermal EMF.....................................
Bandwidth (-3 dB, typical at 23 °C) ......
<0.55
≤1
≤12 V
≤20 MHz
50
60 W, 62.5 VA (DC to 60 Hz)
(per channel, resistive)
Environment
Operating temperature..........................
Storage temperature .............................
Relative humidity ..................................
Pollution degree ....................................
Approved at altitudes up to 2,000 m.
0 to 55 °C
-20 to 70 °C
5 to 85% noncondensing
2
Safety Compliance
■
■
IEC 61010-1, EN 61010-1
UL 61010-01, CSA 61010-1
Electromagnetic Compatibility
This product meets the requirements of the following EMC standards for
electrical equipment for measurement, control, and laboratory use:
EN 61326 (IEC 61326): Class A emissions; Basic immunity
EN 55011 (CISPR 11): Group 1, Class A emissions
AS/NZS CISPR 11: Group 1, Class A emissions
FCC 47 CFR Part 15B: Class A emissions
ICES-001: Class A emissions
■
■
■
■
■
Dynamic Characteristics
Maximum speed....................................
Relay operate plus debounce time
Typical ...............................................
Maximum ..........................................
Expected relay life
Mechanical .......................................
Electrical
10 VDC, 100 mADC, resistive ...........
10 VDC, 1 ADC, resistive ..................
30 VDC, 1 ADC resistive ...................
60 VDC, 1 ADC resistive ...................
2.5x10
6
cycles
1x10 cycles
6
145 cycles
1 ms
3.4 ms
10
8
cycles
Note: For EMC compliance, operate this product according to the documentation.
CE Compliance
This product meets the essential requirements of applicable European Directives
as follows:
2006/95/EC; Low-Voltage Directive (safety)
2004/108/EC; Electromagnetic Compatibility Directive (EMC)
■
■
5x10
5
cycles
1x10
5
cycles
BUY ONLINE at ni.com or C
ALL 800 813 36
93 (U.S.)
2
NI [ NATIONAL INSTRUMENTS CORPORATION ]
