NI Single-Board RIO Embedded Control and Acquisition Devices
24 V Digital Output (sbRIO-964x only)
Number of channels............................ 32
Output type ......................................... Sourcing
External supply voltage....................... 6 to 35 VDC
Continuous output current on each channel
No heat sinks.................................. 250 mA max
External heat sink added................ 1.5 A max (20 A max aggregate)
Specifications
Network
Network Interface............................... 10BASE-T and
100BASE-TX Ethernet
Compatibility....................................... IEEE 802.3
Communication rates.......................... 10 Mb/s, 100 Mb/s autonegotiated
Maximum cabling distance................. 100 m/segment
Physical Characteristics
If you need to clean the device, wipe it with a dry towel.
Torque for screw terminals (J3).......... 0.5 to 0.6 N·m (4.4 to 5.3 lb·in.)
Weight
sbRIO-960x...................................... 198.4 g (7.0 oz)
sbRIO-961x...................................... 266.5 g (9.4 oz)
sbRIO-963x...................................... 269.3 g (9.5 oz)
sbRIO-964x...................................... 292.0 g (10.3 oz)
Power Requirements
Power supply voltage range ............... 19 to 30 V
Power consumption (internal, driving no loads)
sbRIO-960x...................................... 6.00 W
sbRIO-961x...................................... 7.50 W
sbRIO-963x...................................... 7.75 W
sbRIO-964x...................................... 8.00 W
Xilinx Spartan-3 Reconfigurable FPGA
Number of logic cells
Safety Voltages
Connect only to voltages that are within these limits.
sbRIO-9611/9631/9641 .................. 17,280
sbRIO-9612/9632/9642 .................. 46,080
Available embedded RAM
V-to-C .................................................. 35 V max, Measurement Category I
Caution: Do not connect to signal or use for measurements within
Measurement Category II, III, or IV.
sbRIO-9611/9631/9641 .................. 432 kb
sbRIO-9612/9632/9642 .................. 720 kb
Compliance
National Instruments makes no product safety, electromagnetic
compatibility (EMC), or CE marking compliance claims for the sbRIO-
961x/963x/964x. The end-product supplier is responsible for conformity
to any and all compliance requirements.
3.3 V Digital I/O
Number of channels............................ 110
Max current per channel .................... 3mA
Output characteristics
Note: For UL and other safety certifications, refer to the product label or
visit ni.com/certification, search by model number or product line, and
click the appropriate link in the Certification column.
Output high voltage.................... 2.7 V min; 3.3 V max
Output low voltage..................... 0.07 V min; 0.54 V max
Input characteristics
Waste Electrical and Electronic Equipment (WEEE)
Input high voltage ...................... 2.0 V min; 5.25 V max
Input low voltage ....................... 0 V min; 0.8 V max
EU Customers: At the end of their life cycle, all products must be
sent to a WEEE recycling center. For more information about WEEE
recycling centers and National Instruments WEEE initiatives,
visit ni.com/environment/weee.htm.
Analog Input (sbRIO-961x/963x/964x only)
Number of channels............................ 32 single-ended or 16 differential
ADC resolution.................................... 16 bits
Conversion time .................................. 4 µs (250 kS/s aggregate)
Nominal input ranges ......................... 10, 5, 1, and 0.2 V
Environmental
The sbRIO-96xx devices are intended for indoor use only. The sbRIO-96xx
devices are intended to be built into a suitable enclosure
Analog Output (sbRIO-963x/964x only)
Ambient temperature in enclosure
Number of channels............................
4
DAC resolution.................................... 16 bits
Update time (one channel) ................. 3 µs
Output range ....................................... 10 V
(IEC 60068-2-1, IEC 60068-2-2).................-20 to 55 °C
Storage temperature
(IEC 60068-2-1, IEC 60068-2-2)........... -40 to 85 °C
Operating humidity (IEC 60068-2-56) . 10 to 90% RH,
noncondensingStorage
humidity (IEC 60068-2-56)5 to
95% RH, noncondensing
Maximum altitude............................... 2,000 m
24 V Digital Input (sbRIO-964x only)
Number of channels............................ 32
Input type ............................................ Sinking
Digital logic levels
OFF state
Input voltage .............................. ≤5 V
Input current............................... ≤150 µA
ON state
Pollution degree (IEC 60664) ..............
2
Input voltage .............................. ≥10 V
Input current............................... ≥330 µA
BUY ONLINE at ni.com or CALL 800 813 3693 (U.S.)
2
NI [ National Instruments ]
