Board Mounting the USB-621x OEM
The USB-621x OEM device can be mounted on a motherboard using the
50-pin connector(s) and board mount socket(s), as shown in Figures 7
and 8.
Note You can use either one or both 50-pin connectors to board mount the
USB-6212/6216/6218 OEM device.
5
4
3
2
1
1
2
Mounting Standoff
Board Mount Socket
3
4
50-Pin Connector
USB-6218 OEM Device
5
Mounting Screws
Figure 7. USB-621x OEM Mounting Using 50-Pin Connectors
(USB-6218 OEM Device Shown)
Figure 8. USB-621x OEM Device Installed on Motherboard
(USB-6218 OEM Device Shown)
Refer to the Device Components section for more information about
mounting components.
© National Instruments Corporation
7
NI USB-621x OEM User Guide
NI [ National Instruments ]
