CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS
Upgrade!
Radial Lead
@Super
low ESR, high ripple current capability
@ESR
5mO max. (2 & 2.5V
dc
)
@Longer
life (5,000 hours at 105C)
@ESR
after endurance is specified within the initial spec (2 & 2.5V
dc
)
@Rated
voltage range : 2 to 16V
dc
@RoHS
Compliant
@Halogen
Free
PSF
Lower ESR
PSE
?SPECIFICATIONS
Items
Category
Temperature Range
Rated Voltage Range
Capacitance Tolerance
Surge Voltage
Leakage Current
*Note
Characteristics
-55 to +105C
2 to 16V
dc
P20%
(M)
Rated voltage(V)B1.15
I=0.2CV or 500MA, whichever is greater
Where, I : Max. leakage current (MA), C : Nominal capacitance (MF), V : Rated voltage (V)
0.10 max.
Z(-25C)/Z(+20C)[1.15
Z(-55C)/Z(+20C)[1.25
(at 100kHz)
The following specifications shall be satisfied when the capacitors are restored to 20C after the rated voltage is applied for 5,000 hours
at 105C.
Appearance
No significant damage
Capacitance change
[P20%
of the initial value
D.F. (tanE)
[The
initial specified value
ESR
2 & 2.5V
dc
:
[The
initial specified value
16V
dc
:
[150%
of the initial specified value
Leakage current
[The
initial specified value
The following specifications shall be satisfied when the capacitors are restored to 20C after subjecting them to DC voltage at 60C,
90 to 95% RH for 1,000 hours.
Appearance
No significant damage
Capacitance change
[P20%
of the initial value
D.F. (tanE)
[The
initial specified value
ESR
2 & 2.5V
dc
:
[The
initial specified value
16V
dc
:
[150%
of the initial specified value
Leakage current
[The
initial specified value
The capacitors shall be subjected to 1,000 cycles each consisting of charge with the surge voltage specified at 105C for 30 seconds
through a protective resistor(R=1kO) and discharge for 5 minutes 30 seconds.
Appearance
No significant damage
Capacitance change
[P20%
of the initial value
D.F. (tanE)
[The
initial specified value
ESR
2 & 2.5V
dc
:
[The
initial specified value
16V
dc
:
[150%
of the initial specified value
Leakage current
[The
initial specified value
0.5% per 1,000 hours maximum (Confidence level 60% at 105C)
(at 20C, 120Hz)
(at 105C)
(at 20C after 2 minutes)
(at 20C, 120Hz)
Dissipation Factor
(tane)
Low Temperature
Characteristics
(Max.Impedance Ratio)
Endurance
Bias Humidity Test
Surge Voltage Test
Failure Rate
*Note : If any doubt arises, measure the leakage current after the following voltage treatment.
Voltage treatment : DC rated voltage is applied to the capacitors for 120 minutes at 105C.
?DIMENSIONS
[mm]
@Terminal
Code : E
F05, F08, H08
FD'
Coated Case
Fd
FP0.5
Size code F05
F08
fD
6.3
fd
0.45
0.6
F
2.5
fD'
L'
L+1.0max.
FA5
0.5
3.5
FD+0.5max.
L+0.3max. L+1.0max.
H08
8.0
0.6
5.0
L+1.5max.
HB5
JB5
10.0
(F05, F08, H08)
L'
15min.
Fd
4min.
FP0.5
FP0.5
FA5, HB5, JB5
FD'
Coated Case
?MARKING
EX) 2.5V560MF
(FA5)
L'
15min.
4min.
(HB5, JB5)
F
6D6
560
2.5
V
(1/2)
CAT. No. E1001K
NPC [ NIPPON PRECISION CIRCUITS INC ]
