Revision history
Table 23. Document revision history (continued)
M25P16
Date
Revision
Changes
Page Program, Sector Erase and Bulk Erase updated in Features.
VIO max modified in Table 9: Absolute maximum ratings.
10-Oct-2006
9
Table 15: AC characteristics (grade 6, T9HX technology) added.
VFQFPN8 package specifications updated (see Table 17). Note 1 added
to Table 18. Note: on page 52 modified.
Small text changes. Hardware Write protection added to Features.
VCC supply voltage and VSS ground signal descriptions added. Figure 4:
Bus master and memory devices on the SPI bus modified, note 2
removed and replaced by an explanatory paragraph. Write In Progress bit
behavior specified at Power-up (see Section 7: Power-up and power-
down). TLEAD added to Table 9: Absolute maximum ratings. Grade 3
temperature range added.
09-Jan-2007
10
Table 11: Data retention and endurance and Table 16: AC characteristics
(25 MHz operation, grade 3) added.
SO8W and VFQFPN8 package specifications updated (see Section 11:
Package mechanical).
Eliminated the reference to the Deep Power-down mode and updated the
Read Identification instruction in Section 6.3: Read Identification (RDID).
Inserted UID and CFI content columns in Table 5: Read Identification
(RDID) data-out sequence.
Modified Data bytes for RDID instruction in Table 4: Instruction set.
Modified Q signal in Figure 10: Read Identification (RDID) instruction
sequence and data-out sequence.
15-Jun-2007
11
Modified Test condition and maximum values for ICC3 in Table 14: DC
characteristics.
Eliminated Table 15: AC characteristics (Grade 6).
Modified the maximum value for fC in Table 15: AC characteristics (grade
6, T9HX technology).
Removed ‘low voltage’ from the title. Changed the typical time for Bulk
Erase on page 1.
Section 6.3: Read Identification (RDID) updated.
Added note 2 and 3 to Table 9: Absolute maximum ratings.
31-Oct-2007
10-Dec-2007
12
13
Modified maximum value for tCLQV in Table 15: AC characteristics (grade
6, T9HX technology).
Applied Numonyx branding.
54/55