M25P16
16 Mbit, serial Flash memory, 75 MHz SPI bus interface
Features
■
■
■
■
■
■
■
■
■
16 Mbit of Flash memory
Page Program (up to 256 bytes) in 0.64 ms
(typical)
Sector Erase (512 Kbit) in 0.6 s (typical)
Bulk Erase (16 Mbit) in 13 s (typical)
2.7 V to 3.6 V single supply voltage
SPI bus compatible serial interface
75 MHz Clock rate (maximum)
Deep Power-down mode 1 µA (typical)
Electronic signatures
– JEDEC standard two-byte signature
(2015h)
– Unique ID code (UID) with 16 bytes read-
only, available upon customer request
– RES instruction, one-byte, signature (14h),
for backward compatibility
More than 100,000 Erase/Program cycles per
sector
Hardware Write Protection: protected area size
defined by three non-volatile bits (BP0, BP1
and BP2)
More than 20 year data retention
Packages
– ECOPACK® (RoHS compliant)
SO8W (MW)
208 mils width
VDFPN8 (ME)
8 x 6 mm (MLP8)
VFQFPN8 (MP)
6 × 5 mm (MLP8)
SO8N (MN)
150 mils width
■
■
■
■
SO16 (MF)
300 mils width
December 2007
Rev 13
1/55
1