FEDL63187B-06
Semiconductor
1
ML63187B/63189B
•
I/O ports
Input ports:
Selectable as input with pull-up resistor/input with pull-down resistor/high-impedance
input
Input-output ports: Selectable as input with pull-up resistor/input with pull-down resistor/high-impedance
input
Selectable as P-channel open drain output/N-channel open drain output/CMOS
output/high-impedance output
Can be interfaced with external peripherals that use a different power supply than this device uses. V
DD
is the
power supply pin for ports.
Number of ports:
ML63187B
Input-output port
: 2 ports
×
4 bits
ML63189B
Input port
: 1 port
×
4 bits
Input-output port
: 4 ports
×
4 bits
•
Melody output
Melody frequency
Tone length
Tempo
Melody data
Buzzer driver signal output
•
LCD driver
Number of segments
Duty
Bias
Frame frequency
Contrast
Display modes
:
:
:
:
:
529 to 2979 Hz
63 types
15 types
Resides in the program memory
4 kHz
: 1024 Max. (64 SEG
×
16 COM)
: 1/1 to 1/16 duty
: Selectable as 1/4 or 1/5 bias
regulator circuit built-in
: 64 Hz (at 1/16 duty) , 128 Hz (at 1/8 duty ) , 256 Hz (at 1/4 duty) ,
512Hz (at 1/2 duty) , 1024 Hz (at 1/1 duty )
: A maximum of 16 levels adjustable
: Selectable s all-ON mode/all-OFF mode/power down mode/normal
display mode adjustable contrast.
•
System reset function
•
System reset by RESET pin (Built-in 2 kHz RESET sampling circuit can be selected by mask option)
•
System reset by power-on detection (When not using 2 kHz RESET sampling circuit)
•
System reset by detection that low-speed clock has stopped oscillation
•
Battery check
Low-voltage supply check
The value of the judgment voltage is selected by the software by setting the LD1 and LD0 bits of BLDCON.
LD1
0
0
1
1
LD0
0
1
0
1
Judgment Voltage (V)
1.05
±
0.10
1.20
±
0.10
1.80
±
0.10
2.40
±
0.10
Remarks
Ta = 25°C
Ta = 25°C
Ta = 25°C
Ta = 25°C
•
Power supply backup
Backup circuit (voltage multiplier) enables operation at 0.9 V minimum
2/36
OKI [ OKI ELECTRONIC COMPONETS ]
