OV2650
2 Megapixel
product brief
available in
a lead-free
package
ultra small 1/5” 2 Megapixel CameraChip™ sensor with
High Dynamic Range (HDR) and anti-shake functionality
The OV2650 is a single-chip, high-performance
2 Megapixel CMOS CameraChip sensor with a
1/5” optical format. The OV2650 is based on
OmniVision’s new 1.75
μm
OmniPixel3™
architecture which uses Ultra Low Stack Height
(ULSH) pixels that allows for improved low light
sensitivity (520 mV/lux-sec). This new pixel
architecture also makes it possible for the
OV2650 to fit in a 6.5 x 6.5 mm camera module.
Even with such a small footprint, the OV2650 is
a feature-rich device that includes an advanced
Image Signal Processor (ISP) and several new
innovative features, such as image stabilization
(anti-shake) and HDR mode.
The HDR mode of the OV2650 has a unique feature that
enables it to increase the dynamic range from 65 dB in full
resolution to about 85 dB in half resolution, a useful function
for video capturing.
The OV2650 operates at up to 15 frames per second (fps) in
full resolution and 30 fps in SVGA mode. The captured data
can be transferred either by a standard parallel digital video
port (DVP) or by a single-lane MIPI high-speed serial
interface. The DVP can also be used for input from an external
secondary camera, enabling the advanced ISP of the OV2650
to be used by the secondary camera with continued output
through the MIPI interface.
All required image processing functions are programmable
through the Serial Camera Control Bus (SCCB) interface.
For identification purposes, the OV2650 includes a one-time
programmable (OTP) memory.
OMNIVISION [ OMNIVISION TECHNOLOGIES, INC. ]
