■
Ratings
Rated voltage
125 VAC
250 VAC
1A
0.5 A
Resistive load
Note:
The electrical rating applies under the following test conditions:
Ambient Temperature = 20±2°C, Ambient Humidity = 65±5%, Operating frequency = 30 operations/min.
■
Approved Standards
UL Recognized/CSA Certified
Rated voltage
125 VAC
250 VAC
1A
0.5 A
D3D
■
Contact Specifications
Item
Specification
Material
Minimum applicable load
(see note)
Crossbar
Gold alloy
1 mA at 5 VDC
Specification
EN61058-1 (VDE approval)
Rated voltage
125 VAC
250 VAC
1A
0.5 A
D3D
Note:
Minimum applicable loads are indicated by
N
standard refer-
ence values. This value represents the failure rate at a 60%
(λ
60
) reliability level (JIS C5003).
The equation
λ
60
=0.5 x 10
-6
/ operations indicates that a failure
rate of 1/2,000,000 operations can be expected at a reliability
level of 60%
Testing conditions: 5E4 (50,000 operations), T55 (0°C to 55°C)
Engineering Data
■
Panel Cutout Dimensions
0
22.9
−0.1
■
Contact Form
SPDT
SPST-NC
SPST-NO
R1 MAX.
0.1
11.2+
0
Switch insertion
R
direction
t
t = 0.8 to 1.5 mm
NC
COM
NO
NC
COM
COM
NO
Dimensions
■
Dimensions and Operating Characteristics
Plunger Models
D3D-111
D3D-121
D3D-131
8.1
dia.
6 dia.
Note: 1.
Unless otherwise specified, all units are in millimeters and a tolerance of
±0.4
mm applies to all dimensions
2.
The operating characteristics are for operation in the A direction (indicated by the arrow))
R3
A
25
13.5
11.4
1.5
15
Type
Model
OF max.
TTF max.
TT
OP1
(NC-OFF)
13 mm
OP2
(NO-ON)
12 mm
D3D-111
Plunger model
D3D-121
204 gf
357 gf
9.0 mm (reference value)
13 mm
12 mm
D3D-131
15.75±
0.2
R0.5
6.5
2
15
OP2 OP1
(See (See
note.) note.)
OP min.
10
11
Note:
The dimensions OP1 and OP2 apply to the D3D-111 only. The D3D-121
and D3D-131 are SPST-NC and SPST-NO respectively and so therefore
have only one corresponding dimension here (OP).
50
Miniature Door Switch
D3D
OMRON [ OMRON ELECTRONICS LLC ]
