EE-SX670/671/672/673/674A/R
EE-SX670/671/672/673/674A/R
Precautions
Refer the Technical Information Section for general precautions.
The sensing window is made of a polycarbonate resin which
withstands chloride solvents and strong acids but is soluble in
strong alkali, aromatic hydrocarbons, and aliphatic
hydrocarbonate chloride solvents.
The casing material uses a PBT resin but is soluble in strong
alkali solvents.
Iron
350°C
3 sec
The temperature of the terminals at the time of soldering must not
exceed the characteristics found in the table provided here:
Item
Dip
Temperature
260°C
Permissible
time
10 sec
Remarks
The portion be-
tween the base of
the terminals and
the position 1 5
1.5
mm from the ter-
minal base must
not be soldered.
The terminal base uses a polycarbonate resin, which could be
deformed by excessive soldering heat.
NOTE: DIMENSIONS SHOWN ARE IN MILLIMETERS. To convert millimeters to inches divide by 25.4.
OMRON ELECTRONICS, INC.
One East Commerce Drive
Schaumburg, IL 60173
OMRON CANADA, INC.
885 Milner Avenue
Scarborough, Ontario M1B 5V8
1-800-55-OMRON
Cat. No. EO5DAX4
1/99
Specifications subject to change without notice.
416-286-6465
Printed in U.S.A.
OMRON [ OMRON ELECTRONICS LLC ]
