欢迎访问ic37.com |
会员登录 免费注册
发布采购

AMIS-30622 参数 Datasheet PDF下载

AMIS-30622图片预览
型号: AMIS-30622
PDF下载: 下载PDF文件 查看货源
内容描述: I²C微步进电机驱动器 [I²C Micro-Stepping Motor Driver]
分类和应用: 驱动器运动控制电子器件信号电路光电二极管电动机控制电机
文件页数/大小: 42 页 / 491 K
品牌: ONSEMI [ ON SEMICONDUCTOR ]
 浏览型号AMIS-30622的Datasheet PDF文件第2页浏览型号AMIS-30622的Datasheet PDF文件第3页浏览型号AMIS-30622的Datasheet PDF文件第4页浏览型号AMIS-30622的Datasheet PDF文件第5页浏览型号AMIS-30622的Datasheet PDF文件第6页浏览型号AMIS-30622的Datasheet PDF文件第7页浏览型号AMIS-30622的Datasheet PDF文件第8页浏览型号AMIS-30622的Datasheet PDF文件第9页  
AMIS-30622
I²C Micro-Stepping Motor Driver
General description
The AMIS-30622 is a member of a stepper
motordriver family with position controller and
control/diagnostics interface integrated in one
single chip.
The family consists of two products:
AMIS-30621 with LIN interface, ready to build
dedicated mechatronics solutions connected
remotely with a LIN master.
AMIS-30622 with SERIAL interface, ready to
act as peripheral device next to a
microcontroller.
The chip receives high-level positioning instructions
through the interface and subsequently drives the
motor coils until the desired position is reached. The
on-chip position controller is configurable (OTP and
Interface) for different motor types, positioning ranges
and parameters for speed, acceleration and
deceleration.
The AMIS-30622 acts as a slave on the bus and the
master can fetch specific status information like actual
position, error flags, etc. from each individual slave
node.
Features
Motordriver
Microstepping (1/2, 1/4, 1/8, 1/16)
Low resonance & noise
High resolution
Programmable peak current up to 800mA
20kHz PWM current-control
Automatic selection of fast & slow decay mode
Internal fly-back FETs
Fully integrated current sense
8V-29V supply voltage
Automotive compliant
Full diagnostics and status information
Position controller
Configurable speeds, acceleration and
deceleration
Flexible hold-current
Movement/position sensor-input
Optional stall detection
Serial interface
2-wire serial interface
5V microcontroller compatible
Up to 32 node addresses
5V regulator with wake-up on LIN activity
Protection
Over-current protection
Under-voltage management
Over-voltage protection
High-temp warning and shutdown
Low-temp warning
LIN bus short-circuit protection to supply & ground
Controller with RAM and OTP memory
Power Saving
Power-down supply current <50µA
5V regulator with wake-up on LIN activity
EMI compatibility
Power drivers with slope control
Applications and benefits
The AMIS-30622 is ideally suited for small
positioning applications. Target markets include:
automotive (headlamp alignment, HVAC, idle
control, cruise), industrial equipment (lighting, fluid
control, labeling, process, XYZ tables) and building
automation (HVAC, surveillance, satellite dish
positioning). Suitable applications typically have
multiple axes or require mechatronic solutions with
the driver chip mounted directly on the motor.
The high abstraction level of the products’
command set reduces the load of the processor on
the master side. Scaling of the application towards
number of axes is straight-forward: hardware - and
software designs are extended in a modular way,
without severely effecting the demands on the master
microcontroller. The bus structure simplifies PCB
track-layout and/or wiring architectures.
Microstepping operation removes the design trade-off
between minimal operation speed and avoiding the
risk of noise and step-loss due to resonance
phenomena. The stall-detection feature (optional)
offers silent, yet accurate position-calibrations during
the referencing run and allows semi-closed loop
operation when approaching the mechanical end-
stops.
All these benefits result in reduced system-cost and
time-to-market and improved technical performance.
©2008 SCILLC. All rights reserved.
June 2008 – Rev. 3
Publication Order Number:
30622/A