Slotted Optical Switch
OPB817Z
Features:
•
•
•
•
0.20” (5.08 mm) wide gap, 0.86” (21.84 mm) deep slot
24” (609 mm) 26 AWG wires
Dust protection
Two mounting tabs
Product Photo Here
Description:
The
OPB817Z
slotted switch consists of an infrared emitting diode and a NPN silicon phototransistor mounted in
an opaque housing with clear windows for dust protection. Switching of the phototransistor occurs whenever an
opaque object passes through the slot.
The
OPB817Z
has an 0.86” (21.844 mm) deep slot allowing for a longer reach of the optical center line from the
mounting plane. The phototransistor internal apertures are 0.10” x 0.06” (0.25 mm x 1.52 mm) on the sensor side
(“S”) and 0.05” x 0.06” (1.27 mm x 1.52 mm) on the emitter side (“E”).
Custom electrical, wire and cabling and connectors are available. Contact your local representative or OPTEK for
more information.
Applications:
•
Non-contact object sensing
•
Assembly line automation
•
Machine automation
•
Equipment security
•
Machine safety
Ordering Information
Part Number
OPB817Z
Description
Slotted switch
1
4
Color/
Red-1
Black-2
White-3
Green-4
Description
Anode
Cathode
Collector
Emitter
2
3
RoHS
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
Issue A.2
01/06
Page 1 of 3
OPTEK Technology Inc. —
1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747
FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com
OPTEK [ OPTEK TECHNOLOGIES ]
