Slotted Optical Switch
OPB819Z
Features:
•
Non-contact switching
•
24” (609 mm) long wire leads
•
1.25” ( 31.75 mm) wide slot, 1.38” (35.05 mm) deep slot
Description:
The
OPB819Z
slotted switch consists of an infrared emitting diode and an NPN silicon phototransistor mounted in
an opaque housing with clear windows for dust protection. Switching of the phototransistor occurs whenever an
opaque object passes through the slot.
The
OPB819Z
has an 1.38” (35.05 mm) deep and 1.25” (31.75 mm) wide slot allowing for a longer reach of the
optical center line from the mounting plane. The switch housing is designed to use the lens of each component as
the optical aperture resulting in an equivalent aperture diameter of 0.06” (1.52 mm).
Custom electrical, wire and cabling and connectors are available. Contact your local representative or OPTEK for
more information.
Applications:
•
Non-contact object sensing
•
Assembly line automation
•
Machine automation
•
Equipment security
•
Machine safety
Color /
Pin #
Red-1
Black-2
Description
Anode
Cathode
Color /
Pin #
White-3
Green-4
Description
Collector
Emitter
1
3
2
4
[ MILLIMETERS]
DIMENSIONS ARE IN:
INCHES
Ordering Information
Part
Number
OPB819Z
LED Peak
Wavelength
890 nm
Sensor
Slot
Width /
Depth
Aperture
Emitter/
Sensor
None
Lead
Length /
Spacing
24" / 26
AWG Wire
CONTAINS POLYSULFONE
To avoid stress cracking, we suggest using
ND Industries’
Vibra-Tite
for thread-locking.
Vibra-Tite
evaporates fast without causing structural
failure in OPTEK’s molded plastics.
Transistor 1.26" / 1.38”
RoHS
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
Issue A.3
06/07
Page 1 of 3
OPTEK Technology Inc. —
1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747
FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com