Slotted Optical Switch
OPB854A1, OPB854A2, OPB854A3
OPB854B1, OPB854B2, OPB854B3
Features:
•
•
•
•
•
Opaque housing material for ambient light rejection
Non-contact switching
Printed circuit board mounting, lead spacing 0.300” (7.62 mm)
Slot width 0.100” (2.54 mm)
Choice of three mounting configurations
OPB854_1
Product Photo Here
OPB854_2
OPB854_3
Description:
Each
OPB854
series contains an Infrared Light Emitting Diode (LED) and an NPN silicon phototransistor mounted
on opposite sides of a 0.100” (2.54 mm) wide slot in an opaque plastic housing. The OPB854 series has an
equivalent aperture of 0.60” (1.52 mm) in diameter because of the lens on the emitting an sensing devices.
The difference between the
OPB854A
aeries and
OPB854B
series are electrical characteristics.
Switching of the phototransistor occurs whenever an opaque object passes through the slot.
Custom electrical, wire and cabling and connectors are available. Contact your local representative or OPTEK for
more information.
Applications:
•
•
•
•
•
Non-contact interruptive object sensing
Assembly line automation
Machine automation
Equipment security
Machine safety
Part Number
OPB854A1
OPB854B1
OPB854A2
OPB854B2
OPB854A3
OPB854B3
890 nm
LED Peak
Wavelength
Ordering Information
Sensor
Slot Width /
Depth
Aperture
Emitter/Sensor
Lead Length /
Spacing
Transistor 0.100" / 0.250”
None
0.400" / 0.300"
RoHS
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
Issue A .1 12/06
Page 1 of 4
OPTEK Technology Inc. —
1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747
FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com
OPTEK [ OPTEK TECHNOLOGIES ]
