Optically Coupled Isolator
OPI110, OPI113, OPI1264 Series
Features:
•
•
•
•
10 kV electrical isolation
Choice of phototransistor or photodarington output
Low-cost plastic housing
UL recognized File No. E58730
*
Product Photo Here
Description:
Each Optoisolator in this data sheet contains an infrared Light Emitting Diode (LED) and a NPN silicon
Photosensor. The
OPI110
and
OPI1264
devices have 890 nm Light Emitting Diode (LED) and NPN
phototransistor sensor, whereas the
OP113
has a 890 nm LED and a photodarlington sensor. The devices are
sealed in a precast opaque housing with a optically transmissive path between the LED and the photosensor.
The Optoisolators in this data sheet are UL approved under E 58730.
This series is designed for transmission of information between one power supply voltage and another where the
potentials during surge conditions are not greater than the guaranteed isolation voltage.
Custom electrical, wire and cabling and connectors are available. Contact your local representative or OPTEK for
more information.
Applications:
•
•
•
•
•
High voltage isolation between
input and output
Electrical isolation in dirty
environments
Industrial equipment
Medical equipment
Office equipment
Part
Number
OPI110
OPI110A
LED
Peak
Wavelength
Ordering Information
Sensor
Isolation
Voltage
(,000)
CTR
Min /
Max
12.5 / NA
25 / NA
Transistor
OPI110B
OPI110C
OPI113
OPI1264
OPI1264A
Transistor
OPI1264B
OPI1264C
50 / 125
100 / NA
890 nm
Photodarlington
10
50 / 125
100 / NA
50 / NA
12.5 / NA
25 / NA
10 / 40
5 / 40
30
0.50" / 0.55"
10 / 40
V
CE
I
F
(mA)
(Volts)
Typ / Max
Max
Lead
Length /
Spacing
RoHS
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
Issue A
05/07
Page 1 of 3
OPTEK Technology Inc. —
1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747
FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com
OPTEK [ OPTEK TECHNOLOGIES ]
