CCTV Security
Networking
Video
Video in/out impedance
Video in/out level
Video bandwidth
Differential gain
Differential phase
Linearity
Tilt
Compatibility
Signal to noise ratio
FM carrier frequency
Connector type
Audio
Audio in/out impedance
Audio in/out level
Frequency response
Signal to noise ratio
Total harmonic distortion
Connector type
Data
Data rate
Bit error rate
Data formats available
Connector type
75
Ω
1 volt peak to peak, 1.5 volts max
5 Hz to 8 MHz @ -3dB
< 1.0 % typical
< 1.0° typical
± 1.1 % typical
≤
0.5 % typical
NTSC, PAL, SECAM, RS-170, RS-170A
>67 dB using RS-250C standards @ 1 km
70 MHz
BNC
600
Ω
(balanced) or 10 kΩ (unbalanced)
-6 to +6 dBm
10 Hz to 20 KHz
> 60 dB
< 1.0 %, 1 KHz at maximum modulation
Hi-density 15 pin DB9 (DE15)
Selection Guide
Digital Broadcast
AM/IM Analog
SWFM Analog
SWFM Analog
Analog-to-Digital
RGB Video
Datacom
RF CATV
Appendix
DC to 300 Kbps
10
-9
Async Rs-232, RS-422, RC-485/2W, Glenlock, Manchester,
20 mA current loop, TTL, or six Contact Closures
Hi-density 15 pin DB9 (DE15)
Opticomm
reserves the
right to change
product
specifications
without notice.
General
Dimensions & Weight
Temperature
Humidity
Operating voltage
Vibration/Shock
Stand Alone (SA): 7.16” L x 5.21” W x .94” H
39 oz
Insert Card (IC): 6.3” L x 0.8” W x 4.0” H
16 oz
Operating: -40° C to +74° C; Storage; -55° C to +85° C
0 to 95% non-condensing
12 V
DC
(200 mA) or 9-24 V
AC
(300mA) or 110/220 V
AC
Up to 5 g's/Up to 12 g's
Diagnostics
Status monitoring
Sample Configuration
Emissions:
FCC Part 15, ICES-003,
AS/NZS, 3548, EN55022
Immunity:
ENVS0204,
EN61000-4-2,3,4,5,6,11
Safety:
UL1950, CAN/CSA 22.2,
NO.950-95
LED indicator
MADE IN THE USA
97
OPTICOMM [ Opticomm Corporation ]
