ORC-400
Optiva
™
4-Port Optical Card
(Preliminary)
Optiva
™
4-Port Optical Card (Preliminary)
The ORC-400 enables the easy addition and/or integration of optical
paths onto an existing Optiva
™
Daisy-Chain. The ORC-400 can be
situated to the immediate left alongside any Optiva
™
insert cards and
optically transport the daisy-chained video, audio, and/or data signals via
the designated optical ports.
Port 1
Each insert card comes with a label
identifying vital information.
Port 2
System Design
Each optical port on the ORC-400 will accommodate standard Small
Form Pluggable (SFP) lasers approved by Opticomm™ (see “Small Form
Pluggables at the end of the section). It must be ensured that the SFP
selected will accommodate the bandwidth requirement of the Optiva
™
system situated in the Daisy Chain. The data rate must also be within the
bandwidth limitability of the system (presently 2.5 Gbps). The top optical
port will transmit and receive while the remaining three ports will transmit
only. To ensure comprehensive optical redundancy, in the event the
signal is lost on the top optical port, the one below automatically
becomes a designated receive port. This feature enables up to four
redundant paths to run from one node to another or from one node to
4 separate nodes. Optical multicasting can also be implemented using
the same multi-path transmission medium. Each receiving location would
contain the appropriate Optiva
™
receiver to output the video, audio
and/or data signals.
Status
Alert
Port 3
Port 4
ORC-400
Features
• SFP Compatible
• Up to 2.5 Gbps per port
• Up to 4-Port Optical Redundancy
• Up to 4-Port Optical Multicasting
• Optiva
™
Daisy-Chain Compatible
• Compatible with OptivaView
™
SNMP Management Suite
• Stand-Alone or Rack-Mount
• Compatible with MDM-7000 Series for WDM and CWDM Multiplexing
MADE IN THE USA
800-867-8426 • info@opticomm.com • www.opticomm.com • Contact Opticomm for custom requirements.
Opticomm reserves the right to change specifications without notice
OPTICOMM [ Opticomm Corporation ]
