5
Optoway
SPS-4385W-DXXXG
***********************************************************************************************************************************************************************
Input Low Voltage
Output High Voltage
Output Low Voltage
GND
2.4
0.8
Vcc
0.5
V
V
V
GND
CONNECTION DIAGRAM
PIN Signal Name
Description
Transmitter Signal Ground
PIN Signal Name
Description
Receiver Signal Ground
1
2
VEE
T
11 VEE
R
TX_Fault
Transmitter Fault Indication. Logic “1” Output 12 RD-
= Laser Fault. Logic “0” Output = Normal
Operation
Inverse Receiver Data Out
3
4
5
TX_Disable Logic “1” Input (or no connection) = Laser off, 13 RD+
Logic “0” = Laser on.
Receiver Data Out
SDA
Modulation Definition 2 – Two wires serial ID 14 VEE
R
Receiver Signal Ground
Receiver Power – 3.3V±5%
Interface
SDL
Modulation Definition 1 – Two wires serial ID 15 VCC
R
Interface
6
7
MOD-ABS Modulation Definition 0 – Ground in Module
16 VCC
T
Transmitter Power – 3.3V±5%
RS0
RX Rate Select (LVTTL). This pin has an 17 VEE
internal 30k pulldown to ground. A signal on
this pin will not affect module performance.
T
Transmitter Signal Ground
8
9
RX_LOS
RS1
Loss of Signal Out (OC).
18 TD+
Transmitter Data In
TX Rate Select (LVTTL). This pin has an 19 TD-
internal 30k pulldown to ground. A signal on
this pin will not affect module performance.
Inverse Transmitter Data In
10 VEE
R
Receiver Signal Ground
20 VEE
T
Transmitter Signal Ground
MODULE DEFINITION
Module Definition
PIN 4
PIN 5
PIN 6
Interpretation by Host
4
SDA
SCL
MOD-ABS
Serial module definition
protocol
Module Definition 4 specifies a serial definition protocol. For this definition, upon power up, SDA and SDL appear as no connector
(NC) and MOD-ABS is TTL LOW. When the host system detects this condition, it activates the serial protocol. The protocol uses the 2-wire
serial CMOS E2PROM protocol of the ATMEL AT24C01A/02/04 family of components.
**********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798
Fax: 886-3-5979737
E-mail: sales@optoway.com.tw http: // www.optoway.com.tw 8/1/2012 V2.0