Optoway
FEATURES
l
l
l
l
l
l
l
l
l
l
l
l
XPS-2341W-CXX0G
1
***********************************************************************************************************************************************************************
XPS-2341W-CXX0G
(RoHS Compliant)
10Gbps /
40 km
/
CWDM
XFP Single-Mode Optical Transceiver for OC-192 / 10GbE / 10G FC
**********************************************************************************************************************************************************************
DESCRIPTION
Support 9.95 Gbps to 10.5 Gbps CWDM-SH Application
Uo to 40 km Link Distance
Complaint with XFP MSA
Compliant with XFI 10G Serial Electrical Interface
Temperature-stabilized 8-Wavelength CWDM EML
Transmitter: from 1470 nm to 1610 nm
2-Wire Interface for Integrated Digital Diagnostic
Monitoring
XFI Loopback Mode
No reference Clock required
Power Dissipation < 3.5 W
+3.3V and +5 V Power Supply
RoHS-6 Compliant
0 to 70
o
C Case Operating Temperature
APPLICATIONS
l
SONET OC-192 / SDH STM-64
l
10GBASE-ER/EW 10G Ethernet
l
40 km 10G Fibre Channel
LASER SAFETY
This single-mode transceiver is a Class 1 laser product. It
complies with IEC-60825 and FDA 21 CFR 1040.10 and
1040.11. The transceiver must be operated within the
specified temperature and voltage limits. The optical ports
of the module shall be terminated with an optical connector
or with a dust plug.
XPS-2341W-CXXG series CWDM transceiver is
designed for single-mode fibre serial optical data
communications such as OC-192 / SDH STM-64, 10G
Ethernet 10GBASE-ER/EW and 10G Fibre Channel.
This module is designed for single mode fiber and
operates at a nominal wavelength of CWDM wavelength.
There are eight center wavelengths available from 1470 nm
to 1610 nm, with each step 20 nm. The transmitter section
consists
of
a
temperature-stabilized
CWDM
electrical-modulated laser (EML), driver and signal
conditioner. The receiver section incorporates a PIN
photodiode integrated with a trans-impedance preamplifier
(TIA) and signal conditioner.
The module is with the XFP 30-pin connector to allow
hot plug capability. Integrated Tx and Rx signal conditioners
provide high jitter-tolerance for full XFI compliance and no
external reference clock required. The internally ac coupled
high speed serial I/O simplifies interfacing to external
circuitry. Dual 5V and 3.3V power supply is needed. The
optical output can be disabled by LVTTL logic high-level
input of TX_DIS. Loss of signal (RX_LOS) output is
provided to indicate the loss of an input optical signal of
receiver.
A serial EEPROM in the transceiver allows the user to
access transceiver digital diagnostic monitoring and
configuration data via the 2-wire XFP Management
Interface. This interface uses a single address, A0h, with a
memory map divided into a lower and upper area. Basic
digital diagnostic data is held in the lower area while specific
data is held in a series of tables in the high memory area.
ORDER INFORMATION
P/No.
XPS-2341W-CXXG
Central
Wavelength
-C470
-C490
-C510
-C530
Min.
(nm)
1464.5
1484.5
1504.5
1524.5
Bit Rate
(Gb/s)
9.95
–
10.5
o
10G
ER / EW
Max.
(nm)
1477.5
1497.5
1517.5
1537.5
Distance
(km)
40
Label
C47
C49
C51
C53
Wavelength
(nm)
CWDM*
Central
Wavelength
-C550
-C570
-C590
-C610
Package
XFP with DMI
Min.
(nm)
1544.5
1564.5
1584.5
1604.5
Typ.
(nm)
1550
1570
1590
1610
Case Temp
(
o
C)
-5 to 70
Max.
(nm)
1557.5
1577.5
1597.5
1617.5
RoHS
Compliant
Yes
Label
C55
C57
C59
C61
CWDM* Wavelength (-5 to 70 C)
Typ.
(nm)
1470
1490
1510
1530
CWDM*: 8 Wavelengths from 1470 nm to 1610 nm, each step 20 nm.
**********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC.
No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798
Fax: 886-3-5979737
E-mail: sales@optoway.com.tw http: // www.optoway.com.tw
2009/7/1
V1.0
OPTOWAY [ OPTOWAY TECHNOLOGY INC ]
