欢迎访问ic37.com |
会员登录 免费注册
发布采购

OX16PCI954-TQC60-A1 参数 Datasheet PDF下载

OX16PCI954-TQC60-A1图片预览
型号: OX16PCI954-TQC60-A1
PDF下载: 下载PDF文件 查看货源
内容描述: 集成的四通道UART和PCI接口 [Integrated Quad UART and PCI interface]
分类和应用: 电信集成电路电信电路PC
文件页数/大小: 73 页 / 438 K
品牌: OXFORD [ OXFORD SEMICONDUCTOR ]
 浏览型号OX16PCI954-TQC60-A1的Datasheet PDF文件第2页浏览型号OX16PCI954-TQC60-A1的Datasheet PDF文件第3页浏览型号OX16PCI954-TQC60-A1的Datasheet PDF文件第4页浏览型号OX16PCI954-TQC60-A1的Datasheet PDF文件第5页浏览型号OX16PCI954-TQC60-A1的Datasheet PDF文件第6页浏览型号OX16PCI954-TQC60-A1的Datasheet PDF文件第7页浏览型号OX16PCI954-TQC60-A1的Datasheet PDF文件第8页浏览型号OX16PCI954-TQC60-A1的Datasheet PDF文件第9页  
F
EATURES
Four 16C950 High performance UART channels
8/32-bit Pass-through Local Bus
IEEE1284 EPP parallel port
Multi-function target PCI controller, fully PCI 2.2 and
PCI Power Management 1.0 compliant
UARTs fully software compatible with 16C550-type
devices.
Baud rates up to 15Mbps in asynchronous mode and
60Mbps in external 1x clock mode
128-byte deep FIFO per transmitter and receiver
Flexible clock prescaler from 1 to 31.875
Automated in-band flow control using programmable
Xon/Xoff in both directions
Automated out-of-band flow control using CTS#/RTS#
and/or DSR#/DTR#
OX16PCI954
Integrated Quad UART
and PCI interface
Arbitrary trigger levels for receiver and transmitter
FIFO interrupts and automatic in-band and out-of-
band flow control
Infra-red (IrDA) receiver and transmitter operation
9-bit data framing as well as 5,6,7 and 8
12 multi-purpose IO pins which can be configured as
interrupt input pins
Can be reconfigured using optional non-volatile
configuration memory (EEPROM)
Global Interrupt Status and readable FIFO levels to
facilitate implementation of efficient device drivers
Operation via IO or memory mapping.
Detection of bad data in the receiver FIFO
5.0V operation
160 TQFP package
D
ESCRIPTION
The OX16PCI954 is a single chip solution for PCI-based
serial and parallel expansion add-in cards. It is a dual
function PCI device, where function 0 offers four ultra-high
performance OX16C950 UARTs, and function 1 is
configurable to offer either an 8 bit Local Bus or a bi-
directional parallel port. Serial port cards with up to 8 ports
(or with 4 serial ports and a parallel port) can be designed
without redefining any device or timing parameters.
Each channel in the OX16PCI954, the fastest available
PC-compatible UART, offers data rates up to 15Mbps and
128-deep transmitter and receiver FIFOs. Deep FIFOs
reduce CPU overhead and allow utilisation of higher data
rates. Each channel is software compatible with the widely
used industry-standard 16C550 devices and compatibles
as well as the OX16C95x family of high performance
UARTs. In addition to increased performance and FIFO
size, the UARTs also provide the full set of OX16C95x
enhanced features including automated in-band flow
control, readable FIFO levels etc.
The efficient 32-bit, 33MHz target-only PCI interface is
compliant with version 2.2 of the PCI Bus Specification and
version 1.0 of PCI Power Management Specification. For
applications that do not require the internal parallel port or
the local Bus, card designers can assign a Subsystem
Vendor ID and a Subsystem ID using 32 input pins. If the
UARTs are not required, the Local Bus can be extended
from 8-bit operation to a full 32-bit pass-through interface.
For full flexibility, all the default register values can be
overwritten using an optional Microwire
TM
serial EEPROM.
To enhance device driver efficiency and reduce interrupt
latency, internal UARTs have multi-port features such as
shadowed FIFO fill levels, a global interrupt source register
and Good-Data Status, readable in four adjacent DWORD
registers visible to logical functions in IO space and
memory space.
Expansion of serial cards beyond four channels is possible
using the 8-bit pass-through Local Bus function. The
addressable space can be increased up to 256 bytes, and
divided into four chip-select regions. In 32-bit mode the bus
can map up to 16kb of Memory address space. This
flexible expansion scheme caters for cards with up to 20
serial ports using external 16C950, 16C952, 16C954 or
compatible devices, for composite applications such as
combined serial and parallel port expansion cards.
The OX16PCI954 also provides an IEEE1284 EPP parallel
port which fully supports the existing Centronics interface.
The parallel port can be enabled in place of the Local Bus.
Oxford Semiconductor Ltd.
69 Milton Park, Abingdon, Oxon, OX14 4RX, UK
Tel: +44 (0)1235 824900
External—Free Release
Fax: +44(0)1235 821141
©
Oxford Semiconductor 2005
DS-0029 Jul 05
Part No. OX16PCI954-TQC60-A1
OX16PCI954-TQA1G