SPECIFICATION CONTROL DRAWING
MATERIALS
1. INSULATION SLEEVE: Heat-shrinkable, transparent blue, radiation cross-linked modified polyvinylidene
flouride.
2. SINGLE-WIRE SEAL: Immersion resistant thermoplastic.
3. THREE-WIRE SEAL: Immersion resistant thermoplastic.
4. CRIMP SPLICE: Base metal: Copper Alloy 101 or 102 per ASTM B-75.
Plating: Tin per MIL-T-10727, Type 1.
Color code: See table below.
Dimensions of Crimp Splice :
Part
Prod.
Name
Rev.
Size
D-436-52
C
16
D-436-53
Installation Data:
Splicer
Size
16
12
Wire Size Range of Crimp Splice
One Wire
Two wires
Three wires
Minimum
Maximum
Minimum
Maximum
Minimum
Maximum
20
16
16
12
24
22
TITLE :
C
12
ØA
2.69 (0.106)
2.56 (0.101)
3.91 (0.154)
3.73 (0.147)
ØB
1.75 (0.069)
1.63 (0.064)
2.59 (0.102)
2.46 (0.097)
Crimp Splice
D
14.86 (0.585)
14.35 (0.565)
14.86 (0.585)
14.35 (0.565)
E
7.11 (0.280)
6.60 (0.260)
7.11 (0.280)
6.60 (0.260)
Color Code
Blue
Yellow
20
16
24
22
22
18
TE Connectivity
305 Constitution Drive
Menlo Park, CA 94025, USA
Raychem
Products
IN-LINE SPLICE SEALING SYSTEM,
2 OR 3 TO 1 SPLICE: Tin Plated,
Color Coded, with Inspection Slots
DOCUMENT NO.:
DATE:
UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS.
INCHES DIMENSIONS ARE BETWEEN BRACKETS.
TOLERANCES:
0.00 N/A
0.0 N/A
0 N/A
DRAWN BY:
ANGLES: N/A
ROUGHNESS IN
MICRON
TE Connectivity reserves the right to amend this
drawing at any time. Users should evaluate the
suitability of the product for their application.
DCR NUMBER:
D-436-52/-53
DOC ISSUE:
15-Apr-11
PROD. REV.
SCALE:
SIZE:
2
SHEET:
REPLACES:
M. FORONDA
N/A
D001302
SEE TABLE
None
A
1 of 2
Print Date: 9-May-11
If this document is printed it becomes uncontrolled. Check for the latest revision.
PANDUIT [ PANDUIT CORP. ]
