CUSTOMER DRAWING
Product
Name
D-101-31
Product Dimensions
L
øA
øB
max
min
min
17.25
4.55
5.00
(0.680)
(0.180)
(0.200)
øD
max
5.00
(0.200)
Cable Dimensions
øE
øG
min
max
2.5
4.55
(0.100)
(0.180)
J0.5
(J0.02)
7
(0.275)
MATERIALS
1. INSULATION SLEEVE: Heat-shrinkable, transparent blue, radiation cross-linked modified polyvinylidene fluoride.
2. SOLDER PREFORM WITH FLUX:
SOLDER: TYPE Sn63 per ANSI-J-STD-006.
FLUX:
TYPE ROM1 per ANSI-J-STD-004.
3. MELTABLE RING: Thermally stabilized thermoplastic. Color: gray.
4. MELTABLE RING: Thermally stabilized thermoplastic. Color: blue.
APPLICATION
1. This part is designed to provide an environment protected shield termination on cables, rated for 125C minimum, meeting the
dimensional criteria listed, having nickel plated copper shields.
2. Install using TE approved convection or infrared tools in accordance with TE assembly procedure RCPS-100-70.
3. Assemblies will meet requirements of TE specification RT-1404 and National Aerospace Standard NAS-1747.
4. Temperature range: -55C to +150C.
For best results, prepare the cable as shown:
TITLE:
SOLDERSLEEVE SHIELD
TERMINATOR
Unless otherwise specified dimensions are in
millimeters.[Inches dimensions are shown in brackets]
TOLERANCES:
0.00 N/A
0.0 N/A
0 N/A
PREPARED BY:
ANGLES: N/A
ROUGHNESS
IN MICRON
CAGE CODE:
Raychem
Devices
DOCUMENT NO.:
D-101-31
REV:
DATE:
Tyco Electronics Corporation reserves
the right to amend this drawing at any
time. Users should evaluate the
suitability of the product for their
application.
ECO NUMBER:
C
SCALE:
SIZE:
June 9, 2011
SHEET:
YNGUYEN
06090
ECO-11-011935
© 2009-2011 Tyco Electronics Corporation. All rights reserved.
If this document is printed it becomes uncontrolled. Check for the latest revision.
NTS
A
1 of 1