SPECIFICATION CONTROL DRAWING
MATERIALS
1. INSULATION SLEEVE: Heat-shrinkable, transparent blue, radiation cross-linked modified polyvinylidene
flouride.
2. MELTABLE SEALING RINGS: Modified thermoplastic.
3. SEAMLESS STUB SPLICER: Base Metal: Copper Alloy 101 or 102 per ASTM B-75.
Plating: Nickel per QQ-N-290.
Color code: See table below.
Dimensions of Stub Splicer:
Part
Prod.
Name
Rev.
D-436-77
D
I.D.
O.D.
Max. Weight
Color Code
1.75 (0.069)
2.67 (0.105)
1.65 lbs/Mpc
Blue
1.65 (0.065)
2.57 (0.101)
D-436-78
D
1900 - 6755
2.60 (0.102)
3.89 (0.153)
2.15 lbs/Mpc
Yellow
2.49 (0.098)
3.73 (0.147)
* Not all wire combinations falling within the CMA range can be accommodated within the splicer barrel.
For list of some of the usable wire combinations which can be spliced and sealed, see Thermofit Splicing
Table D-436-60/-61.
CMA Range*
779 - 2680
Tyco Electronics Corporation
305 Constitution Drive
Menlo Park, CA 94025, USA
UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS.
INCHES DIMENSIONS ARE BETWEEN BRACKETS.
Tyco Electronics reserves the right to amend this
ANGLES: N/A
TOLERANCES:
drawing at any time. Users should evaluate the
0.00 N/A
suitability of the product for their application.
ROUGHNESS IN
0.0 N/A
MICRON
0 N/A
DRAWN BY:
REPLACES:
DCR NUMBER:
Raychem
Products
DOCUMENT NO.:
DATE:
TITLE :
STUB SPLICE SEALING
SYSTEM MULTI-WIRE
D-436-77/-78
DOC ISSUE:
05-Dec.-00
PROD. REV.
SCALE:
SIZE:
1
SHEET:
M. FORONDA
N/A
D001300
SEE TABLE
None
A
1 of 2
If this document is printed it becomes uncontrolled. Check for the latest revision.