SPECIFICATION CONTROL DRAWING
Product Revision
Product Name
D-103-33
D-103-34
D-103-35
D-103-36
M
N
M
M
L
max
20.5
(0.805)
‘XY’ = WIRE GAUGE (AWG)
Product Dimensions
øA
øB
K
min
min
min
7.00
(0.275)
7.60
(0.300)
150
(5.900)
AWG
22
22
20
20
øD
max
7.00
(0.275)
Cable Dimensions
øE
J±0.5
min
(J±0.02)
3.56
(0.140)
7.00
(0.275)
Color of
Item 4
black
white
black
white
MATERIALS
1. INSULATION SLEEVE: Heat-shrinkable, transparent blue, radiation cross-linked polyvinylidene fluoride.
2. SOLDER PREFORM WITH FLUX:
SOLDER: TYPE Sn63 per ANSI-J-STD-006.
FLUX:
TYPE ROL1 per ANSI-J-STD-004.
THERMAL INDICATOR: red.
3. MELTABLE RINGS: Thermally stabilized thermoplastic. Color:gray.
4. GROUND LEAD: Raychem 55A0111-XY in accordance with MIL-W-22759/32 AWG ‘XY’ (see table) stranded
tin plated copper. Color: see table.
APPLICATION
1. These parts are designed to provide an environment protected shield termination on cables, rated for 125°C minimum, meeting the
dimensional criteria listed, having a tin or silverplated copper shields.
2. Temperature range: -55°C to +150°C.
Install using Raychem-approved convection or infrared heating tools in accordance with Raychem process standard RCPS-100-70.
For best results, prepare the cable as shown:
* A trademark of Raychem Corporation.
Raychem
THERMOFIT
DEVICES
Raychem Corporation
300 Constitution Drive
Menlo Park, CA 94025
USA
TITLE:
SOLDERSLEEVE* DEVICE
WITH PRE-INSTALLED LEAD
DOCUMENT NO.:
DCR NUMBER:
UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS.
INCHES DIMENSIONS ARE BETWEEN BRACKETS.
Raychem reserves the right to amend this
ANGLES: N/A
TOLERANCES:
drawing at any time. Users should evaluate
0.00 N/A
the suitability of the product for their
ROUGHNESS IN
0.0 N/A
application.
MICRON
0 N/A
D-103-3X
REPLACES:
D981005
SCALE:
None
SIZE:
A
D1033X
SHEET:
1 of 1
DRAWN BY:
DATE:
PROD. REV.
DOC ISSUE:
M. FORONDA
06/15/98
SEE TABLE
5
If this document is printed it becomes uncontrolled. Check for the latest revision.