SPECIFICATION CONTROL DRAWING
Product Revision
Product Name
D-108-00
D-108-01
D-108-02
D-108-03
F
F
E
F
Product Dimensions
L MAX
17.25
(0.680)
17.25
(0.680)
17.25
(0.680)
20.5
(0.810)
øA min
1.9
(0.075)
2.8
(0.110)
4.4
(0.175)
7.1
(0.280)
øB min
2.4
(0.095)
3.15
(0.125)
5.0
(0.200)
7.6
(0.300)
MATERIAL
1. INSULATION SLEEVE: HEAT-SHRINKABLE, RADIATION CROSS-LINKED POLYVINYLIDENE
FLOURIDE. TRANSPARENT BLUE.
2. SOLDER PREFORM WITH FLUX:
Solder: Sn96 Ag4 per ANSI J-STD-006.
Flux: ROL1 per ANSI J-STD-004.
3 & 4. MELTABLE INSERTS: Polyolefin-based thermoplastic. Color : red.
NOTES
A. The parts covered by this SCD are for use in attaching a ground wire to the shield of a cable. They may
be used on cables rated for at least 135°C minimum, having silver plated copper shields and meeting
the dimensional criteria shown in the table.
B. Parts will meet requirements of Raychem specification RT-1404 and National Aerospace Standard
NAS-1747 when installed per Raychem-approved convection or infrared tools in accordance with
Raychem assembly procedure RCPS-100-70.
TEMPERATURE RATING: -55°C to +175°C.
Raychem
THERMOFIT
DEVICES
Raychem Corporation
300 Constitution Drive
Menlo Park, CA 94025
USA
TITLE:
SOLDERSLEEVE
SHIELD TERMINATOR
DOCUMENT NO. :
DCR NUMBER:
UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS.
INCHES DIMENSIONS ARE BETWEEN BRACKETS.
Raychem reserves the right to amend this
ANGLES: N/A
TOLERANCES:
drawing at any time. Users should evaluate
0.00 N/A
the suitability of the product for their
ROUGHNESS IN
0.0 N/A
application.
MICRON
0 N/A
D-108-00/-01/-02/-03
REPLACES:
D980867
SCALE:
None
SIZE:
A
D961392
SHEET:
1 of 1
DRAWN BY:
DATE:
PROD. REV.
DOC ISSUE:
M. FORONDA
04/09/98
SEE TABLE
3
If this document is printed it becomes uncontrolled. Check for the latest revision.
PANDUIT [ PANDUIT CORP. ]
