SPECIFICATION CONTROL DRAWING
MATERIALS
1. INSULATION SLEEVE: Heat-shrinkable, transparent blue, radiation cross-linked modified polyvinylidene
fluoride.
2. INTEGRAL THREE-HOLE INSERT: Low outgassing immersion resistant thermoplastic, color-natural.
3. SEPARATE THREE-HOLE INSERT: Low outgassing immersion resistant thermoplastic, color-natural.
4. CRIMP SPLICER: Base Metal: Copper Alloy 101 or 102 per ASTM B-75.
Plating: Tin per MIL-T-10727, Type 1.
APPLICATION
1. This assembly is designed to provide immersion resistant 2 or 3 to 1 in-line splices wires having a total CMA per
side between 304 and 1510 and insulations rated for at least 135°C.
2. For requirements and assembly instructions, see Raychem Devices Specification Control Drawing D-436-42/-43.
Tyco Electronics Corporation
305 Constitution Drive
Menlo Park, CA 94025, USA
Raychem
Products
DOCUMENT NO.:
DATE:
TITLE :
UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS.
INCHES DIMENSIONS ARE BETWEEN BRACKETS.
TOLERANCES:
0.00 N/A
0.0 N/A
0 N/A
DRAWN BY:
ANGLES: N/A
ROUGHNESS IN
MICRON
Tyco Electronics reserves the right to amend this
drawing at any time. Users should evaluate the
suitability of the product for their application.
DCR NUMBER:
IN-LINE SPLICE
SEALING SYSTEM, 2 OR
3 TO 1
D-436-0115
DOC ISSUE:
14-Nov.-00
PROD. REV.
SCALE:
SIZE:
1
SHEET:
REPLACES:
M. FORONDA
N/A
D001275
A
None
A
1 of 1
If this document is printed it becomes uncontrolled. Check for the latest revision.