LMR-400-UF
TIMES
MICROWAVE SYSTEMS
LMR- 400-UF
UltraFlex Communications Coax
®
Ideal for…
•
Drop-in replacement for RG-8/9913 Air-Dielectric type Cable
•
Jumper Assemblies in Wireless Communications Systems
•
Short Antenna Feeder runs
•
Any application that requires periodic/repeated flexing
• Connectors:
A wide variety of connectors are available
for LMR-400-UF cable, including all common interface
types, reverse polarity, and solder-on center pins. Most
LMR connectors employ crimp outer attachment using
standard hex crimp sizes.
•
Flexibility
and bendability are hallmarks of the LMR-
• Cable Assemblies:
All LMR-400-UF cable types are
400-UF cable design. The flexible outer conductor
available as pre-terminated cable assemblies. Refer to
enables the tightest bend radius available for any cable of
the section on FlexTech for further details.
similar size and performance.
• Low Loss
is another hallmark feature of LMR-400-
Part Description
UF. Size for size LMR has the lowest loss of any flexible
Stock
Application
Jacket
Color Code
cable and comparable loss to semirigid hard-line cables.
Part Number
• RF Shielding
is 50 dB greater than typical single
LMR-400-UF
Indoor/Outdoor
TPE
Black 54040
shielded coax (40 dB). The multi-ply bonded foil outer
conductor is rated conservatively at > 90 dB (i.e. >180
Construction Specifications
dB between two adjacent cables).
Description
Material
In.
(mm)
•
Weatherability:
LMR-400-UF cables are designed
Inner Conductor
Stranded BC
0.108 (2.74)
Foam Polyethylene
0.285 (7.24)
for outdoor exposure and have a life expectancy in excess
Dielectric
Outer Conductor
Aluminum Tape
0.291 (7.39)
of 10 years.
• LMR - UltraFlex
has a stranded center conductor
and rubber outer jacket designed for multiple bending/
flexing cycles. It is used for both indoor and outdoor
applications.
®
Overall Braid
Jacket
Tinned Copper
0.320
Black Thermoplastic Elastomer 0.405
(8.13)
(10.29)
62
(800) TMS-COAX • www.timesmicrowave.com