Product Specification
PE43701
Product Description
The PE43701 is a HaRP™-enhanced, high linearity, 7-bit RF
Digital Step Attenuator (DSA). This highly versatile DSA
covers a 31.75 dB attenuation range in 0.25 dB steps. The
Peregrine 50Ω RF DSA provides a parallel or serial-
addressable CMOS control interface. It maintains high
attenuation accuracy over frequency and temperature and
exhibits very low insertion loss and low power consumption.
Performance does not change with Vdd due to on-board
regulator. This next generation Peregrine DSA is available in a
5x5 mm 32-lead QFN footprint.
The PE43701 is manufactured on Peregrine’s UltraCMOS™
process, a patented variation of silicon-on-insulator (SOI)
technology on a sapphire substrate, offering the performance
of GaAs with the economy and integration of conventional
CMOS.
Figure 1. Package Type
32-lead 5x5x0.85 mm QFN Package
50
Ω
RF Digital Attenuator
7-bit, 31.75 dB, DC-4.0 GHz
Features
•
HaRP™-enhanced UltraCMOS™ device
•
Attenuation: 0.25 dB steps to 31.75 dB
•
High Linearity: Typical +59 dBm IIP3
Excellent low-frequency performance
•
3.3 V or 5.0 V Power Supply Voltage
•
Fast switch settling time
•
Programming Modes:
•
Direct Parallel
•
Latched Parallel
•
Serial-Addressable: Program up to
eight addresses 000 - 111
•
High-attenuation state @ power-up (PUP)
•
CMOS Compatible
•
No DC blocking capacitors required
•
Packaged in a 32-lead 5x5x0.85 mm QFN
•
Figure 2. Functional Schematic Diagram
Switched Attenuator Array
RF Input
RF Output
Parallel Control
Serial In
7
Control Logic Interface
CLK
LE
A0
A1
A2
P/S
Document No. 70-0243-04
│
www.psemi.com
©2008-2009 Peregrine Semiconductor Corp. All rights reserved.
Page 1 of 13
PEREGRINE [ PEREGRINE SEMICONDUCTOR CORP. ]
