WWW.PHIHONG.COM
PLA05A Characteristics
INPUT:
Immunity
AC Input Voltage Range
90 to 264VAC
EN61000-4-2, Level 3
EN61000-4-5, Level 3
AC Inrush Current
40A max @ 240VAC, 25°C
Input Power Saving
<0.3W max @ 120/240VAC, no load
California Energy Commission Compliant,
Level IV
General
Leakage Current
≤ 10 uA max
Dielectric Withstand (Hi-pot)
3KVAC, Primary to Secondary
MTBF (Full Load, 25°C)
100K Hrs. min. at max load, 25°C ambient and
120VAC
Efficiency
≥ 64.4%
OUTPUT:
Ripple (1)
300 mVp-p
DC Output Connector
2.1 mm x 5.5 mm Center Positive
AC Input Clip
Over Voltage Protection
5VDC: OVP shall not exceed 9V Max
9VDC: OVP shall not exceed 16.2V Max
12VDC: OVP shall not exceed 21V Max
Hold-up Time
Fixed US blade
10 ms (min) @ 120VAC, Half Load
Short Circuit Protection
Auto Recovery
ENVIRONMENTAL:
Operation Temperature (Convection)
0°C ~ 50°C
Storage Temperature
-40°C ~ 85°C
Humidity
90% RH Max
Emissions
FCC Class B
EN55022 class B
Note: (1) Measured after 10 minutes with by-pass
capacitors 0.1uf / 10uf at output connector terminal and
oscilloscope set at 20 MHz.
Phihong reserves the right to make changes without
further notice. Please consult Phihong USA and visit
www.phihong.com for the most up-to-date
specifications.
11-11-08
PHIHONG [ PHIHONG USA INC. ]
