欢迎访问ic37.com |
会员登录 免费注册
发布采购

POE806U-8MP-N-R 参数 Datasheet PDF下载

POE806U-8MP-N-R图片预览
型号: POE806U-8MP-N-R
PDF下载: 下载PDF文件 查看货源
内容描述: 每端口中跨8端口95W [8-Port 95W per Port Midspan]
分类和应用:
文件页数/大小: 3 页 / 83 K
品牌: PHIHONG [ PHIHONG USA INC. ]
 浏览型号POE806U-8MP-N-R的Datasheet PDF文件第1页浏览型号POE806U-8MP-N-R的Datasheet PDF文件第3页  
POE806U-8MPN Characteristics
INPUT:
AC Input Voltage Rating
100 to 240VAC
AC Input Voltage Range
90 to 264VAC
AC Input Current
15.0A (RMS) 90VAC at maximum load
10.0A (RMS) 230VAC at maximum load
AC Input Frequency
47 to 63Hz
Leakage Current
< 3.5mA maximum at 264VAC, 60Hz
Max In-Rush Current:
30A for 115VAC at maximum load
60A for 230VAC at Maximum load
(Cold Start at Ambient 25°C)
OUTPUT:
Total Output Power
95W per port
760W Maximum Total Power
Ripple (P-P)
250mV maximum
Efficiency
75% (typical) at maximum load, and 120VAC 60Hz
Hold-Up Time
16mS min. 120VAC and maximum load
Transient O/P Voltage Protection
60V maximum at switch on and off at any AC line Phase
Turn-On Delay Time (for PoE detection)
20 sec maximum at maximum load, 120VAC 60Hz
ENVIRONMENTAL
Temperature
Operation
Non-Operation
Humidity
Operation
Non-Operation
WWW.PHIHONG.COM
EMC
EN55022 Class A, FCC Class A with UTP cabling
EN55022 Class B, FCC Class B with FTP cabling
Isolation Test
Primary to Secondary: 4242VDC for 1 minute
Primary to Ground: 2121VDC for 1 minute
Secondary to Ground: 2121VDC for 1 minute
Immunity EN50082-1
ESD:
EN61000-4-2
RS:
EN61000-4-3
EFP:
EN61000-4-4
Surge:
EN61000-4-5
CS:
EN61000-4-6
Voltage Dips:
EN61000-4-11
Harmonic:
EN61000-3-2
Level 3
Level 2
Level 2
Level 3
Level 2
Class A
IEEE802.3af/at Interoperability
If 25K Ohm is detected then the unit operates in
“IEEE802.3at mode” 33.6W 2 pair powering. 12.5K
detection resistance required for full power 95W/port.
Over-Voltage/Current, Short Circuit Protection
Outputs equipped with short circuit protection and
overload protection as per 802.3af specification except at
maximum average current is 1.69A
The output can be shorted permanently without damage
Over Temperature Protection
Automatic shutdown without damage
Indicators
Solid Green LED: Power detected “ON”
Flashing Green: IEEE802.3at or (af) detected
Yellow LED: Fault detected
SNMPv2c management port Interface
NIC interface for remote management via secure IP
access
Input Connector (Standard Model)
AC Input IEC320 C14
0 to +40C
-25 to +65C
Output Connection
4-pair powering for full power
Pins 3,6, 4,5(+) Pins 1,2, 7,8 (-)
2-pair powering for IEEE802.3at mode
Pins 3,6(+) Pins 1,2 (-)
Warranty
1 Year
5 to 90%
5 to 90%