PixArt Imaging Inc.
High-Performance Optical Mouse Sensor
Overview of Optical Mouse Sensor Assembly
2D Assembly Drawing of ADNS-3080
Shown with ADNS-2120-001 trim lens, ADNS-2220-001
assembly clip and HLMP-EG3E-xxxxx led.
PixArt Imaging
provides an IGES file drawing de-
scribing the base plate molding features for lens and PCB
alignment.
The components interlock as they are mounted onto
defined features on the base plate.
The ADNS-3080 sensor is designed for mounting on a
through hole PCB, looking down. There is an aperture
stop and features on the package that align to the lens.
The ADNS-2120-001 trim lens provides optics for the
imaging of the surface as well as illumination of the
surface at the optimum angle. Features on the lens
align it to the sensor, base plate, and clip with the LED.
The lens also has a large round flange to provide a long
creepage path for any ESD events that occur at the
opening of the base plate.
The ADNS-2220-001 clip holds the LED in relation to
the lens. The LED must be inserted into the clip and the
LED’s leads formed prior to loading on the PCB. The clip
interlocks the sensor to the lens, and through the lens to
the alignment features on the base plate.
The HLMP-EG3E-xxxxx LED is recommended for illumina-
tion. If used with the bin table, sufficient illumination can
be guaranteed.
43.13
1.698
42.53
1.674
39.06
1.538
1.50
0.059
1.00
0.039
29.50
1.161
28.13
1.107
2X
∅
3.55
0.140
1.22 3.22
0.048 0.127
12.60
0.496
11.38
0.448
1.28
0.050
0
5.06
0.199
7.60
0.299
13.88
0.546
15.88
0.625
0
Clear Zone
20X
∅
0.80 Recommended
0.031
Dimensions in millimeters / inches
Figure 3. Recommended PCB mechanical cutouts and spacing
All rights strictly reserved any portion in this paper shall not be reproduced, copied or transformed to any other forms without permission.
4
PixArt Imaging Inc.
E-mail:
fae_service@pixart.com.tw
PIXART [ PIXART IMAGING INC. ]
