PAS5101PE Specification
PAS5101PE CMOS 1.3MEGA DIGITAL IMAGE SESNSOR
General Description
The PAS5101PE is a highly integrated CMOS active-pixel image sensor that has resolution of 1280( H ) x
1024 ( V ). To have an excellent image quality, the PAS5101PE output 10-bits RGB raw data though a parallel
data bus. It is available in 48-pin LCC.
The PAS5101PE can be programmed to set the exposure time for different luminance condition via I2C
TM
serial control bus. By programming the internal register sets, it performs on-chip frame rate adjustment, offset
correction DAC, programmable gain control, 10-bits ADC, 10-bits output companding, interpolated sub-
sampling and defect compensation.
Features
1.3Mega resolution, ~1/3” Lens.
Bayer RGB color filter array.
10-bits parallel RGB raw data output.
On-Chip 10-bits pipeline A/D converter.
On-Chip programmable gain amplifier
4-bits color gain amplifier.
4-bits global gain amplifier.
Digital gain stage.
Continuous variable frame time.
Continuous variable exposure time.
I2C
TM
interface.
20mA power dissipation ( 15fps / 2.5v ).
< 10uA low power-down dissipation.
Window-of-Interest (WOI).
Sub-sampling.
Defect compensation.
Lens shading compensation.
Key Specification
Supply Voltage
Resolution
Array Diagonal
Pixel Size
Max. Frame Rate
Max. System Clock
Max. Pixel Clock
Color Filter
Exposure Time
Scan Mode
Sensitivity
S/N Ratio
Chief Ray Angle
Package Type
2.5v ~ 3.3v
1280 ( H ) x 1024 ( V )
5.9mm ( ~1/3” Optic )
3.6μm x 3.6μm
~15 fps @ 1.3Mega
Up to 48MHz
Up to 24MHz
RGB Bayer Pattern
~ Frame time to Line time
Progressive
TBD
TBD
20° ~ 24°
48-pin LCC
All rights strictly reserved any portion in this paper shall not be reproduced, copied or transformed to any other forms without permission
.
1
PixArt Imaging Inc.
E-mail:
fae_service@pixart.com.tw
v1.0 2005/4/27
PIXART [ PIXART IMAGING INC. ]
