PAW3603DH-NF
PAW3603DH-NF LOW POWER WIRELESS LASER MOUSE SENSOR
General Description
The PAW3603DH-NF is a low power CMOS process wireless laser mouse sensor with DSP integration chip that
serves as a non-mechanical motion estimation engine for implementing a computer mouse.
Features
Single power supply
Precise laser motion estimation technology
Complete 2-D motion sensor
No mechanical parts
Optical Lens
1:1
27 MHz
20 inches/sec
800/1000/1200/1600/2000 CPI
6600 frames/sec
4mA @Mouse moving (Normal)
500uA @Mouse not moving (Sleep1)
100uA @Mouse not moving (Sleep2)
15uA @Power down mode
Shrunk DIP20
Accurate motion estimation over most of
System Clock
surfaces
High speed motion detection up to 20 inches/sec Speed
High resolution up to 2000 CPI
Resolution
Resolution setting by two method
CPI IO trap select pin (pin15) to 800, 1200, Frame Rate
1600 CPI
Register setting to 800/1000/1200/1600/2000
Operating
CPI
Current
Power down pin and register setting for low
power dissipation
Package
Power saving mode during times of no
movement
Serial Interface for programming and data
transfer
SWKINT pin (pin17) to wake up mouse
controller when sensor wakeup from sleep
mode
No fly on the air
Power Supply
1.73V ~ 1.87V (VDDD,VDDA, VDD)
2.5V ~ 2.9V (VDD)
Key Specification
Ordering Information
Order Number
PAW3603DH-NF
I/O
CMOS output
Resolution
800/1200/1600 CPI
All rights strictly reserved any portion in this paper shall not be reproduced, copied or transformed to any other forms without permission.
1
V1.0, Aug. 2007
PixArt Imaging Inc.
E-mail:
fae_service@pixart.com.tw
PIXART [ PIXART IMAGING INC. ]
