Pomona
®
Model 5243 & 5520 Kit
Do-It-Yourself SMD
Grabber Test Clips
Kit containing 10 pieces of 5243, one of each color.
MATERIALS:
Contact – Stainless steel, Type 301, �½ Hard
Spring – Stainless steel, Type 302.
Cap – Glass Filled Nylon.
Marking: “Model 5243”
Barrel – Glass filled nylon. Color: Matches color of
cap.
Marking: “POMONA GRABBER®”
Finish: Contact – Gold plated per MIL-G-45204,
Type II, 30 to 50 microinches.
RATINGS:
Operating Temperature: +102° C. (+216° F) Max.
Operating Voltage: 30VAC / 60VDC Max.
Current: 0.5 Amperes
ORDERING INFORMATION:
Model 5243 &
5520 Kit
Standard Colors: Available in 10 colors: -0 Black,
-1 Brown, -2 Red, -3 Orange, -4 Yellow, -5 Green,
-6 Blue, -7 Violet, -8 Gray, -9 White
Ordering Example: 5243-2 Color is Red
Ordering 5520 “Kit” – contains one color each of
the 5243-*.
SIMPLIFIED ASSEMBLY PROCEDURE
1. Pull off thumb cap to expose contact connection.
2. Thread wire through thumb cap and strip 3.18
(1/8).
3. Insert stripped end through hole on contact and
solder.
4. Slide thumb cap back onto contact.
All dimensions are in inches. Tolerances (except noted): .xx = ±.02” (,51 mm), .xxx = ± .005” (,127 mm).
All specifications are to the latest revisions. Specifications are subject to change without notice.
Registered trademarks are the property of their respective companies.
Made in USA
6/9/99
SY/EH/LS
Sales: 800-490-2361 Fax: 888-403-3360
Technical Assistance: 800-241-2060
PomonaACCESS
90319
(800) 444-6785 or (425) 446-6010
More drawings available at www.pomonaelectronics.com
Page 1 of 1
C:\Laura Goldberg\FlukeDataSheet\d5243_K5520_1_01.doc
POMONA [ POMONA ELECTRONICS ]
