Model 6491
Modular Passive Oscilloscope Probe
Accessories included with Probe:
Model 6491
Modular Passive Oscilloscope Probe
Features
•
•
•
•
This probe is recommended for general purpose
probing applications and is adjustable for high
frequencies.
Our passive probes are spring loaded, with needle
sharp tips to support precise and safe
measurements.
Probe tips are interchangeable and can be replaced
easily.
Accessories (one of each) included with Probe are:
BNC Adapter
Ground Blade
Ground Lead with Alligator Clip 22 cm (8.66”)
IC Caps: 0.8mm, 1.0mm, and 1.27mm pitch
Insulating Cap (red)
Protection Cap
Solid Tip 0.8mm (0.0315”)
Spring Tip 0.8mm (0.0315”)
Sprung Hook
Trimmer Tool
2 Footer Positioner
Copper (Cu) Pads
Specifications
Attenuation Ratio
Maximum Input Voltage CAT II¹
Scope Bandwidth MHz
Probe Bandwidth MHz (-3 dB)
System Risetime (ns)
Probe Input Resistance (MΩ)
Probe Input Capacitance (pF)
Cable Length
1:1
55 Vrms
60
30
< 12
1
< 39.5
4 ft. (1.2 m)
1
Rating:
Per IEC 61010-031. Maximum voltage allowed on the low or ground
connection including shell and housing must not exceed 30 V.
Ordering Information
Model: 6491
30 MHz X1 Oscilloscope Probe
Sales: 800-490-2361
Technical Support:
technicalsupport@pomonatest.com
Fax: 425-446-5844
Europe:
31-(0) 40 2675 150
International:
425-446-5500
Where to Buy:
www.pomonaelectronics.com
USA:
All dimensions are in inches. Tolerances (except noted): .xx = ±.02” (,51 mm),
.xxx = ± .005” (,127 mm). All specifications are to the latest revisions.
Specifications are subject to change without notice. Registered trademarks are
the property of their respective companies.
Copyright © 2008
D1094821 Rev. 100
Page 1 of 1
POMONA [ POMONA ELECTRONICS ]
